Toshiba D-R4SC, D-KR4SU, D-R4SU owner manual Recording an external source, Preparation

Connect according to A or B.

Recording

DVD-RAM DVD-RW DVD-R

Recording an external source

You can record programs from connected equipment on a DVD-RAM/R/RW disc.

A: Using the input jacks on the rear of the recorder INPUT1 (L-1)

• To record a clearer picture,		Video cable
use the S video jack.	To video	Audio cable
	output	To audio	Red	White	Yellow
	jack
		output jacks

External equipment

To video	To audio		Rear of the recorder
output jack	output jacks
	Audio cable	B: Using the input jacks on the front of the recorder
	Video cable
		Yellow
		White	Red
		INPUT 2 (L-2)

Preparation

•Load a DVD-RAM/R/RW into the recorder.

–Load a disc which has sufficient remaining space to record the program.

–Make sure the loaded disc is not write-protected.

Notes

•If a source of high quality sound track such as DVD audio is recorded with this recorder, the sound quality becomes regular audio CD quality. Refer to the instructions of the connected equipment.

•When you record an external source onto a DVD-R/RW disc, set the connected equipment to output sound you want to

record (if selectable such as multiplex broadcasting), as the recorder records sounds of external source in the stereo type

onto a DVD-R/RW disc, neglecting the setting of “DVD compatible mode” ( page 33).

•DVD-R/RW discs cannot record contents with copy restriction signal embedded (copy-protected or copy once contents), DVD-RAM discs can record copy once contents.

•Some satellite programs via a connected tuner may contain both 4:3 pictures and 16:9 pictures. DVD-R/RW discs cannot record such contents, under restriction of the DVD-Video standard. To record these programs, use DVD-RAM discs.

38