Toshiba D-R4SC Time Shift, Programing a recording Continued, Adding a timer program, Recording

Recording

Programing a recording (Continued)

Shifting the time period of a recording (Time Shift)

If a prior TV program extends beyond its scheduled time and into one that you programmed, you can shift the programmed start and end time of the recording.

e.g. 1:00pm 1:54pm

Time Shift

20 minutes extend

1:20pm2:14pm

1)Press EASY NAVI.

EASY NAVI Main Menu appears.

2)Press / / / to select “Timer Recording”, then press SELECT/ENTER.

REC MENU appears.

3)Press / to select a timer program you want to shift the time period.

4)Press EXTEND.

“Start” and “End” are ready to be input.

5)Press EXTEND repeatedly.

Each time you press the button, “Start” and “End” is shifted in 10 minutes intervals to, up to 60 minutes later.

6)Press SELECT/ENTER.

7)Press EASY NAVI to exit.

Note

•After you shifted the time of a timer program which will be repeated daily or weekly, you should restore the original start/stop time for future recordings.

Adding a timer program

1) Press EASY NAVI.

Deleting a timer program

1)Press EASY NAVI.

EASY NAVI Main Menu appears.

2)Press / / / to select “Timer Recording”, then press SELECT/ENTER.

REC MENU appears.

3)Press / to select a timer program you want to delete.

4)Press QUICK MENU. Quick Menu appears.

5)Press / to select “Program cancel”, then press SELECT/ENTER.

Check the message, then delete the entry.

6)Press EASY NAVI to exit.

Note

•You cannot delete a timer program while another is executed.

Correcting a timer program

1)Press EASY NAVI.

EASY NAVI Main Menu appears.

2)Press / / / to select “Timer Recording”, then press SELECT/ENTER.

REC MENU appears.

3)Press / to select a timer program you want to change, then press SELECT/ENTER.

4)Press / to select an item, then press ADJUST to set the item.

5)Press SELECT/ENTER.

The modification is registered.

6)Press EASY NAVI to exit.

EASY NAVI Main Menu appears.

2)Press / / / to select “Timer Recording”, then press SELECT/ENTER.

REC MENU appears.

3)Press to select a blank line, then press

SELECT/ENTER.

4)Press / to select the item, then press ADJUST to set the item.

Important

•You cannot correct a timer program within 5 minutes before the recording start time. You can only delete the timer program.

Note

•You can program a timer recording whose start time has already passed, unless the another program recording will start within 5 minutes. The portion of the program before the recording starts cannot be saved.

5)When complete, press SELECT/ENTER.

6)Press EASY NAVI to exit.

Note

•While the recorder is preparing for or executing a programmed recording, you cannot add a timer program which will start within 5 minutes and 15 seconds from the current time.

44