Toshiba DK Silent Messaging (Busy Station)

LCD Operation
Messages
110 Strata DK Digital Telephone 10/01
➤To cancel the message from the telephone that set the message
➤Press [PDN] and dial ;;;, where XXX is the [PDN] of the telephone that
set the message.
Silent Messaging (Busy Station)
An audible tone and an LCD message can be sent to an LCD station that is busy. The
busy station can return a message to the callin g station’s LCD. The two stations may
continue this procedure to carry on a “silent” conversation. Soft Keys must be OFF
(0RGH + ) at the sending and receiving stations for this feature to operate.
➤To send a message to a busy station
1. When you receive a
busy tone, press
0RGH + .
210=[DN]
2. Enter the message
number. Station message (10~19) and
system message (60~99). The
LCD displays the message.
(This assumes the message is
already stored in memory.)
3. Press 3DJH.The destination station beeps
four times and the message
displays for 30 seconds, or
until you hang up.
Your LCD confirms the
message was sent.
OVER TO ST210
MSG NO?
MSG SEND