Features
Speed Dial–Advanced Features
Strata DK Digital Telephone 10/01 75
Speed Dial Pause and Flash Storage
Some Speed Dial numbers may require a pause (long or regular) or hookflash be
included (e.g., tone delay requires a pause at the beginning of a Speed Dial number).
Speed Dial Number Linking
You can link any of the Station Speed Dial numbers to System Speed Dial co des or to
any of the optional buttons associated with these codes. This enables up to 36 dig its t o
be stored under one Station Speed Dial button or code.
The number directly stored in the System Speed Dial number dials out first, then the
number linked to it. Typically, a company’s special carrier access telephone numbers
are stored as part of the digit string.
Note A designated station can be used to link System Speed Dial codes. See the
System Administrator’s User Guide.
Important! Before linking Speed Dial Numbers, make sure the Sy stem
Administrator has stored the desired number in the System Speed Dial
you plan on using.
Hookflash Regular Pause Long Pause
The )ODVK button stores a flash
signal only if 6SG'LDO3DXVH
is programmed as a flexible
button on the telephone. The
flash signal is 0.5 or 2 seconds
long (set in system
programming) and is displayed
on the LCD as “F-”.
Press )ODVK
...or enter the hookflash dial
code (&QI7UQ + ).
The pause is either 1.5 or 3
seconds (set in system
programming). The LCD
displays “P-”.
Press 6SG'LDO3DXVH
...or if 6SG'LDO3DXVH is not
on the telephone, press )ODVK
to store a pause.
Ten-second pause, which can
be entered anywhere in the
Speed Dial number. The LCD
displays “L-”.
Press 6SG'LDO/QJ3DXVH.