Features

ISDN Outgoing Calling

ISDN Outgoing Calling

This feature enables you to make outgoing call using an Integrated Services Digital Network (ISDN) trunk, provided that you are connected to a Strata DK424i, DK424 with software Release 4.0 or higher, or DK40i, and that you subscribe to ISDN lines. ISDN trunks offer faster call connection setup, and they also provide more connection circuits.

Making an ISDN outgoing call will either be handled automatically with a timer or by you initiating the ISDN “Start” sequence. The method depends on your system’s programming. See your System Administrator to determine the method.

To make an outgoing call to an ISDN trunk

1.Access an outside CO line

2.Dial the number.

3. Press 6WDUW.

The dialed digits will not be sent until you press this

 

button or until the timer expires.

Subaddress

Subaddress digits may be required for dialing another department, or to send a call to equipment, such as a printer. If you need to enter subaddress digits, follow these instructions:

To make an outgoing call with a subaddress to an ISDN trunk

1.Access an outside CO line

2.Dial the number.

3.

Press 6XE.

The 6XE button informs the system that the following

 

 

digits are the subaddress.

4.

Enter the subaddress.

 

5.

Press 6WDUW.

The dialed digits will not be sent until you press this

 

 

button or until the timer expires.

56

Strata DK Digital Telephone 10/01

Page 68
Image 68
Toshiba DK manual Isdn Outgoing Calling, Subaddress, To make an outgoing call to an Isdn trunk

DK specifications

Toshiba DK (Disk Controller) series has established itself as a pivotal component in modern storage solutions, especially in the realms of personal computing and enterprise systems. This innovative disk controller family is designed to enhance performance, efficiency, and reliability, catering to a diverse range of applications from consumer electronics to data centers.

One of the main features of Toshiba DK is its advanced intelligent caching technology. This feature allows for optimized read and write operations, significantly improving the overall response time of data storage systems. The caching mechanism intelligently predicts data access patterns, storing frequently accessed data in high-speed memory to reduce latency and accelerate performance.

Another significant characteristic of the Toshiba DK series is its robust error correction capabilities. Equipped with sophisticated Error Correction Code (ECC) algorithms, it can detect and correct multiple errors that may occur during data transmission. This aspect is crucial for maintaining data integrity, especially in environments where data is continuously being read and written, such as in enterprise storage solutions.

Furthermore, the Toshiba DK series embraces cutting-edge NAND flash technology. The controllers are engineered to work seamlessly with NAND flash memory, achieving impressive read and write speeds while optimizing endurance. This synergy results in high-performance solid-state drives (SSDs) that are not only faster but also more reliable than traditional hard drives.

Energy efficiency is another hallmark of Toshiba DK. The controllers feature power management capabilities that dynamically adjust power consumption based on workload requirements. This not only leads to lower operational costs but also extends the lifespan of the storage device by minimizing unnecessary wear and tear.

Additionally, Toshiba DK supports various interface protocols, such as SATA, NVMe, and PCIe. This versatility allows it to cater to a wide range of user needs, making it suitable for everything from high-performance gaming rigs to enterprise-level servers.

In conclusion, Toshiba DK series exemplifies excellence in disk controller technology with its intelligent caching, robust error correction, advanced NAND flash integration, energy efficiency, and broad interface support. These features make Toshiba DK a preferred choice for manufacturers and users alike, ensuring they meet the evolving demands of contemporary data storage.