LCD Operation
Memos
➤To return to a busy station message after receiving a busy station message
1.Press 0RGH + .
2.Enter the message number.
3.Press 3DJH.
OVR TO ST210
MSG NO?
Station message (10~19) and system message (60~99). The LCD displays the message. (This assumes the message is already stored in memory.)
Your LCD confirms the |
|
message was sent. | MSG SEND |
Memos
Speed Dial Memos
You can store names (12 characters max.) for each of 40 station speed dial numbers. The memo pad of names can be scrolled to select the appropriate party. The station must be enabled via system programming for LCD message memory.
➤To program Speed Dial names and numbers
1.Press 5HGLDO, then
6SHHG'LDO.
2.Dial a station speed dial code.
3.Press 0RGH.
See Table 16 on Page 136 for speed dial codes.
If a name was previously stored on this code, it appears on the top line.
# * 10 SPEED DIAL
*10 NAME
SPEED DIAL
Strata DK Digital Telephone 10/01 | 111 |
