Installation
Step 4: Connect and Apply Power to Base Unit
1. Plug the AC adapter cord into the AC adapter input jack on the base unit.
1145
|
|
| Line In to DKT Circuit |
AC Adapter | Modular |
| BDKU/BDKS, PDKU2, RDSU (CTX100 |
| Cords | Line Out | and CTX670). ADKU (CTX100 only) |
|
| ||
|
| to DKT |
|
|
|
| 6056 |
CAUTION! Use only the AC adapter supplied with your cordless digital telephone.
2.Plug the AC adapter into a standard 120 VAC wall outlet.
3.Route the power cord where it is not a trip hazard, and where it cannot become chafed and create a fire or electrical hazard.
4.Wrap the power cord around the notch on the bottom of the base unit as shown at the right.
5.Check to see that the power LED is on, indicating the telephone has
power.
1175
6.Before using your cordless digital telephone, be sure to raise the antenna to the vertical position.
12 | Strata |
