Installing Optional Headset | Toshiba DKT2004-CT specification

Installation

Installing Optional Headset

Tips on Extending Battery Pack Life

All rechargeable nickel cadmium batteries can develop a “memory” (reduced charge capacity) caused by repeated charge and discharge cycles. Batteries that have developed this effect do not operate to their fullest capacity.

➤To avoid memory effect, operate the unit until the battery pack is completely discharged before recharging. For example, use the handset off the base all day. Only replace the handset on the base at night after a full day of use. Do not “top off” the charge after using the battery for a short time.

➤To erase memory effect, operate the unit until the battery pack is completely discharged, then recharge it fully. Repeat this process at least three times.

When the battery pack in the handset is low and needs to be charged you see LOW BATT and the handset beeps.

Table 1	Low Battery Symptoms

	On a Call	In Standby Mode
Only the TALK key operates.		None of the keys operate.

Handset beeps once every three seconds.		Handset beeps once.

Complete your call as quickly as possible.		Cannot make call.

Replace battery pack.		Replace battery pack before making a call.

To restore your battery capacity, return the handset to the base unit for charging or replace the handset battery pack with another charged one.

Installing Optional Headset

The optional headset provides a hands-free option for the cordless digital telephone. Only use headsets especially designed or modified for use with radio frequency equipment. With the headset installed, you can use the belt clip to carry the handset and converse through the headset.

➤ Open the cover over the headset jack and plug in the headset. All feature operations are the same as with the handset. When using the headset, the handset earphone and microphone are disconnected.

Strata DKT2004-CT Cordless Digital Telephone 10/02

15

Image 27

Toshiba DKT2004-CT manual Installing Optional Headset, Tips on Extending Battery Pack Life, On a Call Standby Mode

Contents

DKT2004-CT Cordless Digital Telephone User Guide Publication Information Toshiba America Information SYSTEMS, INC. Tais Toshiba America Information Systems, Inc Contents Features Iii Contents Organization Introduction Calls attention to important instructions or information Conventions Related Documents/Media Viii Grand Tour Benefits Applications Benefits Cordless Digital Telephone Standard Parts Base Unit Controls and Functions Charge LED Batt Charge LED Power on LED Features Review Safety Instructions Installation Ratings are Input 120VAC 14W Output 10VDC 500mA Installation Select Location To use with a desk telephone Connect and Apply Power to Base UnitConnect Telephone Cords To use as a stand-alone telephone Line In to DKT Circuit To remove the belt clip Install Handset Battery PackAttach Belt Clip to Handset optional To attach the belt clip to the handset To charge the handset’s battery pack Removing and Charging Your Battery PackCharging Extra Battery Packs To remove the handset’s battery pack Installing Optional Headset Tips on Extending Battery Pack LifeOn a Call Standby Mode Installation Entering Program Mode Configuration3 Configuration Mute Handset Volume LevelRinger Volume Level Handset Charging the Handset Using the Handset To transfer an active call Switching a Call to Your Cordless Digital Telephone Vol Switching a Call to the Desk Telephone To dial a stored number Using MemoryTo store a number To erase a stored number Chain Dialing Account Code Calls Features To dial using Forced Account Codes Verified/Non-Verified Account CodesForced Account Codes Voluntary Account Codes Verified/Non-Verified To dial using the Account Code buttonTo enter an Account Code using access codes Automatic Busy Redial To cancel ACB Automatic CallbackTo set Automatic Callback Station Auto RedialCall Forward System Call Forward Categories Call Forward Settings To use the Call Forward button sequence To change your Pass Code Call Forward Any Call Set for Another Station Call Forward Incoming Line Calls Call Forward System Call Park Orbits To retrieve a parked call To park a call To perform Call Pickup Call PickupGroup Pickup Page/Internal Call Pickup For Calls On Hold Dialing Description Call Waiting Direct Station Selection Buttons HotlineTo connect directly to another station’s extension Do Not Disturb Setting DND for Another Extension To unlock a door Door LocksTo deactivate DND for another extension To change your DND Pass Code Door Phones To answer a door phone callDoor Phone Name/Location To call/monitor a door phone Emergency RingdownHeld Calls Placing Line Appearances or DN Calls on Hold 7 5 Using Automatic HoldSwitching Between Calls Retrieving Held Calls Subaddress Isdn Outgoing Calling Responding to a Lit Msg LED Message Waiting To make an OCA call Off-hook Call AnnounceOverride Calls Busy Override To perform Executive Override Do Not Disturb OverrideExecutive Override To use DND Override Privacy Override Class of Service OverrideTo perform Class of Service Override Paging Answering a All CallEmergency To use Privacy Release To set/cancel PrivacyPrivacy Redial Speed Dial Release and Answer To change Tone Dialing Making a Call Using Speed DialTone/Pulse Dialing Voice Mail Direct Transfer Voice Mail Direct Transfer Feature Access Codes Feature Feature Access Code Sequences Account CodeCall Forward Any Calls Internal and External Call Forward Remote Activation Call Forward External Calls Remote ActivationCall Park Feature Access Codes Night Ring Answer Feature Feature Access Code Sequences LCD Language ChangePrivate Network Access Code LCR Outgoing Call Message Waiting MW Substitution of Dial Travelling Class Override Feature Feature Access Code Sequences Speed Dial RegisterVolume Control Beep Volume Control Ringing Start Application Feature Access Codes Troubleshooting and Specifications Problem Suggestion Troubleshooting Nine Simultaneous Conversation Channels Range and Performance Base Unit SpecificationsRadio Interference General Index LCD Index