Connect Telephone Cords | Toshiba DKT2004-CT specs

Installation

Step 3: Connect Telephone Cords

Step 3: Connect Telephone Cords

Your cordless digital telephone can be used as a stand-alone telephone or in conjunction with your deskset.

There are two telephone line jacks on the back of the base unit of your cordless digital telephone: “Line In” and “Line Out.” You can connect your cordless digital telephone to both the telephone line and a Strata CTX digital telephone.

➤To use as a stand-alone telephone

➤Connect the modular jack labeled “Line In” to the telephone wall jack.

➤To use with a desk telephone

1. Unplug the telephone line cord from your desk telephone.

2. Connect this cord to “Line In” of your cordless telephone.

3. Using the two foot modular cord that came with your cordless telephone, connect the jack labeled “Line Out” to the desk telephone.

Wide	AC Adapter
Blade

1174

Step 4: Connect and Apply Power to Base Unit

Note The AC adapter furnished with this telephone may be equipped with a polarized line plug (a plug having one blade wider than the other). This plug fits into the power outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still does not fit, contact your facilities coordinator about replacing the obsolete plug. Do not alter the shape of the blades on the polarized plug.

Strata DKT2004-CT Cordless Digital Telephone 10/02

11

Image 23

Toshiba DKT2004-CT manual Connect Telephone Cords, Connect and Apply Power to Base Unit, To use as a stand-alone telephone

Contents

DKT2004-CT Cordless Digital Telephone User Guide Publication Information Toshiba America Information SYSTEMS, INC. Tais Toshiba America Information Systems, Inc Contents Features Iii Contents Organization Introduction Calls attention to important instructions or information Conventions Related Documents/Media Viii Grand Tour Benefits Applications Benefits Cordless Digital Telephone Standard Parts Base Unit Controls and Functions Charge LED Batt Charge LED Power on LED Features Review Safety Instructions Installation Ratings are Input 120VAC 14W Output 10VDC 500mA Installation Select Location To use with a desk telephone Connect and Apply Power to Base UnitConnect Telephone Cords To use as a stand-alone telephone Line In to DKT Circuit To remove the belt clip Install Handset Battery PackAttach Belt Clip to Handset optional To attach the belt clip to the handset To charge the handset’s battery pack Removing and Charging Your Battery PackCharging Extra Battery Packs To remove the handset’s battery pack On a Call Standby Mode Installing Optional HeadsetTips on Extending Battery Pack Life Installation Entering Program Mode Configuration3 Configuration Mute Handset Volume LevelRinger Volume Level Handset Charging the Handset Using the Handset To transfer an active call Switching a Call to Your Cordless Digital Telephone Vol Switching a Call to the Desk Telephone To dial a stored number Using MemoryTo store a number To erase a stored number Chain Dialing Account Code Calls Features Forced Account Codes To dial using Forced Account CodesVerified/Non-Verified Account Codes Voluntary Account Codes Verified/Non-Verified To dial using the Account Code buttonTo enter an Account Code using access codes Automatic Busy Redial To set Automatic Callback To cancel ACBAutomatic Callback Station Auto RedialCall Forward System Call Forward Categories Call Forward Settings To use the Call Forward button sequence To change your Pass Code Call Forward Any Call Set for Another Station Call Forward Incoming Line Calls Call Forward System Call Park Orbits To retrieve a parked call To park a call To perform Call Pickup Call PickupGroup Pickup Page/Internal Call Pickup For Calls On Hold Dialing Description To connect directly to another station’s extension Call WaitingDirect Station Selection Buttons Hotline Do Not Disturb Setting DND for Another Extension To unlock a door Door LocksTo deactivate DND for another extension To change your DND Pass Code Door Phone Name/Location Door PhonesTo answer a door phone call To call/monitor a door phone Emergency RingdownHeld Calls Placing Line Appearances or DN Calls on Hold 7 5 Using Automatic HoldSwitching Between Calls Retrieving Held Calls Subaddress Isdn Outgoing Calling Responding to a Lit Msg LED Message Waiting To make an OCA call Off-hook Call AnnounceOverride Calls Busy Override To perform Executive Override Do Not Disturb OverrideExecutive Override To use DND Override Privacy Override Class of Service OverrideTo perform Class of Service Override Paging Emergency Answering aAll Call To use Privacy Release To set/cancel PrivacyPrivacy Redial Speed Dial Release and Answer To change Tone Dialing Making a Call Using Speed DialTone/Pulse Dialing Voice Mail Direct Transfer Voice Mail Direct Transfer Call Forward Any Calls Internal and External Feature Access CodesFeature Feature Access Code Sequences Account Code Call Park Call Forward Remote ActivationCall Forward External Calls Remote Activation Feature Access Codes Night Ring Answer Feature Feature Access Code Sequences LCD Language ChangePrivate Network Access Code LCR Outgoing Call Message Waiting MW Substitution of Dial Travelling Class Override Feature Feature Access Code Sequences Speed Dial RegisterVolume Control Beep Volume Control Ringing Start Application Feature Access Codes Troubleshooting and Specifications Problem Suggestion Troubleshooting Nine Simultaneous Conversation Channels Range and Performance Base Unit SpecificationsRadio Interference General Index LCD Index