Call Pickup, Group Pickup | Toshiba DKT2004-CT specification

Features

Call Pickup

Call Pickup

You can pick up a call that is ringing another station’s extension, a call placed on hold at another station and other types of calls. When you pick up an internal call, the calling station and the called station displays on your LCD.

Group Pickup

Stations can be assigned in system programming to Pickup Groups. As many as 32 groups can be created to enable you to easily pick up incoming (new or transferred) or internal calls that are ringing stations that are in your group or in other groups. This feature does not pick up held calls. You may belong to more than one group. See your CTX System Administrator for group assignments.

Page/Internal Call Pickup

This feature picks up Internal (station to station), Group Page, and All Call Page calls. If these types of calls occur at the same time, the pickup priority is station-to-station and then Page calls in the order of occurrence. In some systems, this feature can be applied to pick up All Call Page exclusively.

➤To perform Call Pickup

1.Press an extension button.

2.Enter a code from the following table.

	Table 3	Call Pickup Feature Codes

	For Incoming Calls:		Dialing	Description
	Group			Picks up a call ringing to a member of your pickup group.

	Directed Extension		+ Primary	Picks up a call ringing on any line appearance of the telephone
	Directed Extension		Ext. No.	specified by its Primary extension number.
			Ext. No.	specified by its Primary extension number.

	Directed Group		+ Group	Picks up a call ringing to a terminal in the specified Pickup
	Directed Group		No.	Group.
			No.	Group.

	Directory Number		+ Ext. No.	Picks up a call ringing to the specified extension number only.
				Other lines ringing on the same phone are unaffected.
	Any External Call			Picks up any incoming outside line call.

Strata DKT2004-CT Cordless Digital Telephone 10/02

35

Image 47

Toshiba DKT2004-CT manual Group Pickup, Page/Internal Call Pickup, To perform Call Pickup

Contents

DKT2004-CT Cordless Digital Telephone User Guide Publication Information Toshiba America Information SYSTEMS, INC. Tais Toshiba America Information Systems, Inc Contents Features Iii Contents Organization Introduction Calls attention to important instructions or information Conventions Related Documents/Media Viii Grand Tour Benefits Applications Benefits Cordless Digital Telephone Standard Parts Base Unit Controls and Functions Charge LED Batt Charge LED Power on LED Features Review Safety Instructions Installation Ratings are Input 120VAC 14W Output 10VDC 500mA Installation Select Location To use with a desk telephone Connect and Apply Power to Base UnitConnect Telephone Cords To use as a stand-alone telephone Line In to DKT Circuit To remove the belt clip Install Handset Battery PackAttach Belt Clip to Handset optional To attach the belt clip to the handset To charge the handset’s battery pack Removing and Charging Your Battery PackCharging Extra Battery Packs To remove the handset’s battery pack On a Call Standby Mode Installing Optional HeadsetTips on Extending Battery Pack Life Installation Entering Program Mode Configuration3 Configuration Mute Handset Volume LevelRinger Volume Level Handset Charging the Handset Using the Handset To transfer an active call Switching a Call to Your Cordless Digital Telephone Vol Switching a Call to the Desk Telephone To dial a stored number Using MemoryTo store a number To erase a stored number Chain Dialing Account Code Calls Features Forced Account Codes To dial using Forced Account CodesVerified/Non-Verified Account Codes Voluntary Account Codes Verified/Non-Verified To dial using the Account Code buttonTo enter an Account Code using access codes Automatic Busy Redial To set Automatic Callback To cancel ACBAutomatic Callback Station Auto RedialCall Forward System Call Forward Categories Call Forward Settings To use the Call Forward button sequence To change your Pass Code Call Forward Any Call Set for Another Station Call Forward Incoming Line Calls Call Forward System Call Park Orbits To retrieve a parked call To park a call To perform Call Pickup Call PickupGroup Pickup Page/Internal Call Pickup For Calls On Hold Dialing Description To connect directly to another station’s extension Call WaitingDirect Station Selection Buttons Hotline Do Not Disturb Setting DND for Another Extension To unlock a door Door LocksTo deactivate DND for another extension To change your DND Pass Code Door Phone Name/Location Door PhonesTo answer a door phone call To call/monitor a door phone Emergency RingdownHeld Calls Placing Line Appearances or DN Calls on Hold 7 5 Using Automatic HoldSwitching Between Calls Retrieving Held Calls Subaddress Isdn Outgoing Calling Responding to a Lit Msg LED Message Waiting To make an OCA call Off-hook Call AnnounceOverride Calls Busy Override To perform Executive Override Do Not Disturb OverrideExecutive Override To use DND Override Privacy Override Class of Service OverrideTo perform Class of Service Override Paging Emergency Answering aAll Call To use Privacy Release To set/cancel PrivacyPrivacy Redial Speed Dial Release and Answer To change Tone Dialing Making a Call Using Speed DialTone/Pulse Dialing Voice Mail Direct Transfer Voice Mail Direct Transfer Call Forward Any Calls Internal and External Feature Access CodesFeature Feature Access Code Sequences Account Code Call Park Call Forward Remote ActivationCall Forward External Calls Remote Activation Feature Access Codes Night Ring Answer Feature Feature Access Code Sequences LCD Language ChangePrivate Network Access Code LCR Outgoing Call Message Waiting MW Substitution of Dial Travelling Class Override Feature Feature Access Code Sequences Speed Dial RegisterVolume Control Beep Volume Control Ringing Start Application Feature Access Codes Troubleshooting and Specifications Problem Suggestion Troubleshooting Nine Simultaneous Conversation Channels Range and Performance Base Unit SpecificationsRadio Interference General Index LCD Index