Installation

Step 4: Connect Telephone Cables

Step 4: Connect Telephone Cables

Your cordless telephone must be connected to a digital telephone PBX port.

WARNING! Never install telephone wiring during a lightning storm.

Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.

Use caution when installing or modifying telephone lines.

To connect as a stand-alone telephone

Connect the modular jack labeled “Line

In” directly to the telephone wall jack using one of the supplied cables (shown at right).

To connect to a Strata DKT

1. Unplug the cable from the DKT and plug into the “Line In” jack of cordless telephone base unit (shown at right).

2. Plug the additional two-foot cable into the “Line Out” jack of the base unit and into the DKT jack located on the bottom of the telephone.

Strata CIX and CTX DKT2204-CT/DKT2304-CT Cordless Digital Telephones 07/06

17

Page 27
Image 27
Toshiba DKT2304-CT manual Connect Telephone Cables, To connect as a stand-alone telephone