![](/images/new-backgrounds/1251157/25115755x1.webp)
Installation
Step 5: Connect and Apply Power
Step 5: Connect and Apply Power
Base Unit
1.Plug the AC adapter cord into the AC adapter input jack on the base unit (shown at right).
2. Plug the AC adapter into a standard 120VAC wall outlet.
3. Check to see that the power LED is on.
Charging Unit
1.Plug the AC adapter cord into the input jack on the charging unit (shown at right).
2.Plug the AC adapter into a standard 120VAC wall outlet.
3.Check to see that the CHARGE LED is on.
Note You can place the handset in the charging unit with or without the belt clip attached.
Important!
•Use only the supplied AC adapter.
•If the CHARGE LED on the charging unit and/or the POWER LED on the base unit do not light, return everything to your Authorized Dealer.
•Always route the power cord where it is not a trip hazard, and where it cannot become chafed and create a fire or electrical hazard.
6790
18 | Strata CIX and CTX |