Toshiba DP-SW25T manual Connection, How to use the PC card slot

Connection

Before connection

• Read the owner’s manual of the device you are connecting to the projector.

• Some types of computer cannot be used or connected to this projector.

Check for an RGB output terminal, supported signal p.69 , etc.

• Turn off the power of both devices before connecting.

• The figure below is a sample connection. This does not mean that all of these devices

can or must be connected simultaneously. (Dotted lines mean items can be exchanged.)

How to use the PC card slot

The wireless LAN PC card enables you to connect the projector wirelessly with a personal computer that supports IEEE802.11b based wireless LAN. p.34 (Please note that commu- nication between all the computers based on IEEE802.11b and this projector is not guaranteed.) You can also use a commercially available memory card to project JPEG image files using this projector. p.42 Please follow the steps below when removing or mounting a PC card.

Computer

(for control)

Audio amplifier, etc.

Video recorder,

DVD player, etc.

To audio input	To RS-232C terminal		To audio output				To S-Video
			p.71 White (L)/Red (R)				output
White (L)/Red (R)
Audio cable	Control cable			Video cable
				(not supplied)			S-Video cable
(not supplied)
							(not supplied)
			CONTROL		S-VIDEO
	MONITOR	AUDIO OUT
				R	L	VIDEO
	COMPUTER 2 IN	AUDIO IN	COMPUTER 1 IN
	( Y/PB/PR )		( Y/PB/PR )

				RGB cable	AV cable
				(not supplied)	(not supplied)
				To audio output	To video
	Audio cable			White (L)/
RGB cable			Audio cable	Red (R)	output
(supplied)	(not supplied)
		Monitor cable Mini	(not supplied)
To RGB	To audio	D-sub 15P-BNC
		(not supplied)	To audio	To RGB	VCR
output	output		output	output
		To Y/CB/CR output
		Green (Y)/Blue (CB)/Red (CR)
		Conversion adapter BNC-pin
		(not supplied)

■Mounting a PC card

qRemove the PC card slot cover.

Press lightly on the circle (“O”) while sliding the cover in the direction of the arrow.

Card slot cover

wInsert the PC card.

After making sure of the card orienta- tion, press it in firmly until it stops.

PC Card

■Removing a PC card

qLook at CARD indicator.

If it is off, proceed to step r.

CARD indicator	Preparations
UNMOUNT button
w Press the UNMOUNT button.
Begins processing for PC card removal.

eWait until CARD indicator goes out.

Never remove the PC card while lit. Doing so could damage the PC card or corrupt your data.

rPress the Eject button.

Eject button

The Eject button is a bit stiff, so press firmly while supporting the projector. Be careful to avoid injury when doing so.

Computer DVD video recorder, etc. Computer

Notes

•COMPUTER terminals 1 and 2 function identically.

•The AUDIO IN terminal doubles for devices connected to COMPUTER terminals 1 and 2.

■If CARD indicator turns red

Press the RESET switch with a thin pin or	CARD indicator
similar implement (it is at the bottom of a	RESET switch
recess).

20 21