Setting up the projector using a Web browser
■How to use the “Projector Configuration Tool”
The “Projector Configuration Tool” uses the Web server features of the projector to set up the projector using a wireless LAN PC card.
When using the “Projector Configuration Tool”, set up the wireless LAN connecting the projector and the computer.
1See “Checking the projector status” p.48 to display information on the screen and write down the IP address.
2Invoke Internet Explorer.
Internet Explorer Ver. 5.0 or later is recommended. Enable the Javascript functions.
3In the address bar, enter the IP address
“http://xxx.xxx.xxx.xxx/” recorded in step 1 above.
The Web browser will then display the following page.
Menu 
Projector name
Projector ID
Enter the projector 
name to be registered.
Note 1: To prevent access from third parties, the projector is restricted to permit access only from the computer that has been set up for the TCP/IP to have the same network address as the projector.
Note 2: If you use a proxy server, do not enable the proxy when accessing the above IP address.
The TCP/IP settings for the projector and computer are required even in the wireless LAN Ad hoc mode.
4Select items from the menu on the left.
Setting: | Allows you to make various settings on the wireless/card |
| menu. When Browser authentication has been set to On, |
| access to the setup page requires the input of the password. |
Status display: | Displays some states of the projector. |
Features: | Introduces the functions available in wireless/card input |
| mode. |
Projector name: | Enter a character string and press the Set button, and it will |
| be set as the projector name. |
Top: | Returns you to the top page. |
TOSHIBA Projector Site: The browser will display the home page at http://
(The Toshiba’s web site can be browsed only when your computer can access the Internet.)
● Details on major items
• Setting
Allows you to make various settings on the wireless/card menu. When Browser authentication |
| ||
has been set to On, access to the setup page requires the input of the password. | Operations | ||
Network: | The items available here are equivalent to those in the wireless/card | ||
| |||
menu. Note, however, that security items such as “Remote control” and “Browser authentication” cannot be set. Entering individual items and press the Execute button to update their setting.
Slide Show: The items available here are equivalent to those in the wireless/card menu. Entering individual items and press the Execute button to update their setting.
Projector name Projector ID
Press this button after entering the password.
Discards what you have entered.
58 | 59 |
