Toshiba EM1-33033E owner manual Removing the paper holders upper plates from the media guide

6. LOADING THE MEDIA

EM1-33033

6. LOADING THE MEDIA

■ Removing the paper holders' upper plates from the media guide

1 Remove the two T-4x8 screws to detach the media guide from the printer.

Media Guide

Screw (T-4x8)

Fig. 6-5

2Remove the SM-3x6 screw or the SM-3x8 screw to detach the paper holders' upper plates from the media guide.

(Right)	(Left)
Screw (SM-3x6)	Screw (SM-3x8)
Paper Holder	Paper Holder

Fig. 6-6

3Attach the media guide back in position.

NOTE: Do not lose the removed upper plates because they are required when using the label rolled with labels facing inside.

9.Set the black mark/feed gap sensor to the correct position by turning the adjusting knob. Turning the knob right will move the sensor towards the center of the media while turning left will move it away from the center of the media.

6-3