Toshiba B-870 SERIES Dip Switch Functions, Turn the POWER OFF before, switching, functions

4. DIP SWITCH FUNCTIONS

EM1-33039E

4. DIP SWITCH FUNCTIONS

4. DIP SWITCH FUNCTIONS

The DIP switches are located to the right of the Guide Wheel.

			WARNING!
Turn the POWER OFF before
switching			the	functions			Guide Wheel
(1)	DIP SW 2
		No.	ON/OFF				FUNCTION
		1	1	2
			OFF	OFF	2400 BPS
			ON	OFF	4800 BPS				Transmission speed
		2	OFF	ON	9600 BPS
			ON	ON	19200 BPS
		3	OFF		1 bit				Stop bit length
			ON		2 bit
		4	OFF		7 bit				Data length
			ON		8 bit
		5	OFF		Without				Parity check
			ON		Without
		6	OFF		EVEN				Parity check (effective when DIP
			ON		ODD				SW #5 is set to ON.)
			7	8
		7	OFF	OFF	XON/XOFF (No XON is output at the power on time.)
						(No XOFF is output at the power off time.)
					READY/BUSY (DTR)
			ON	OFF	(No XON is output at the power on time.)
					(No XOFF is output at the power off time.)				Data protocol
					XON/XOFF+READY/BUSY
			OFF	ON	(XON is output at the power on time.)
					(XOFF is output at the power off time.)
		8
			ON	ON	XON/XOFF (XON is output at the power on time.)
						(XOFF is output at the power off time.)
(2)	DIP SW 1
		No.		ON/OFF			FUNCTION
		1		OFF		Without		Auto ribbon save function
				ON		With
		2	2	3	4
			OFF	OFF	OFF	English
			ON	OFF	OFF	German
			OFF	ON	OFF	French		Language to display LCD error
		3	ON	ON	OFF	Dutch
								message
			OFF	OFF	ON	Spanish
			ON	OFF	ON	Japanese
		4	OFF	ON	ON	Italian
			ON	ON	ON	Not used
		5		OFF		Without		Auto media feed after a cut issue
				ON		With		(See page 8-4)
		6		OFF		Without		Head up function in cut mode Refer to
				ON		With		Note 2.
		7		OFF		Fixed type		Media sensor selection
				ON		Movable type
		8		OFF		Must be set to OFF
				ON

NOTES: 1. The shaded settings are the factory default settings. “OFF” means “OPEN”. 2. The Dip switch #1-6 functions in accordance with equipment to be used.

DIPSW 2

DIPSW 1

Fig. 4-1

4-1