5. INSTALLATION PROCEDURE |
5.1 Connecting the Power Cord and Interface Cable
3)Connect and secure the interface cable to the interface connector in the correct orientation.
Serial interface: | Secure the connector with the screws. |
|
Parallel interface: | Secure the connector with the locking tabs. |
|
| Serial Interface Connector | Parallel Interface Connector |
Serial Interface Cable | Locking Tab |
|
|
|
Locking Tab
Parallel Interface Cable
[Serial Interface Type] | [Parallel Interface Type] |
4)Connect the interface cable to the TOSHIBA TEC POS terminal, and then plug in the power cord to the AC outlet.
Interface Cable
LPT1
NOTE: The above figure shows the example of the interface cable which is connected to the LPT1 port (Parallel interface) on the
5- 2
