Toshiba TRST-56 SERIES Installation Procedure, Connecting the Power Cord and Interface Cable

5. INSTALLATION PROCEDURE EO1-13016

5.1 Connecting the Power Cord and Interface Cable

5. INSTALLATION PROCEDURE

WARNING!

1.Since the power cord and the interface cable are not provided with this unit, please locally purchase ones which meet the specifications. For detail specifications, please contact your nearest authorised TOSHIBA TEC representative.

2.Before connecting the power cord and cables to the printer, turn the power of the POS terminal and printer OFF.

3.Do not pull the power cord hard. Doing this may damage the power cord, causing fire, electric shock, or broken wire.

4.When it thunders, unplug the power cord. Lightning stroke may cause fire or electric shock.

5.Keep the power cord away from a heater. The cover of the power cord may be melted, causing fire or electric shock.

5.Do not connect the power cord to the AC outlet provided on the POS terminal such as ST- 5600, ST-5500, etc.

CAUTION!

1.When separating the AC adapter, please contact your authorized TOSHIBA TEC representative.

2.The built-in AC adapter is exclusively for this printer. Do not use it for any other machines.

3.The AC adapter can be used indoors only. Never use it outdoors.

4.Be sure to unplug the printer when it is not used for a long time.

5.Do not share the power source with other electric appliances which generate noise.

5.1 Connecting the Power Cord and Interface Cable

CAUTION!

1.Be sure to hold the connector when plugging in or unplugging the AC adapter cable.

2.Insert the AC adapter cable and the power cord firmly.

1)Turn the printer power OFF.

2)Insert the power cord into the AC inlet.

AC Inlet

Power Cord

AC Adapter Cable

5- 1