Toshiba EO1-33056D, B-SX6T Series Ribbon Save Function Selection, Control Code Selection

2. PRINTER SETUP

ENGLISH VERSION EO1-33056

2.8 Setting an Operating Environment

2.8.1Parameter Setting (Cont.)

NOTES:

1.	The ribbon saving function is
	available only when an optional
	ribbon saving module (B-SX908-
	R-QM-R) is installed.
2.	The ribbon saving function is
	activated when there is a 20-mm
	or more non-print area in the
	media feed direction.

(11) Ribbon Save Function Selection

This parameter is to choose whether to activate the Ribbon Saving function or not.

This function enables reducing the ribbon loss caused by taking up unused ribbon during non-print areas.

When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears.

<2>PARAMETER SET RBN SAVE ON (TAG)

Use the [FEED] or [RESTART] key to select a desired option.

3.	Ribbon saving is enabled up to 4
	areas per media.
4.	To use the ribbon saving function
	for more than one area in a
	label/tag, there should be at least
	an 8-mm print area between non-
	print areas where the ribbon
	saving is performed.

[RESTART]

[FEED]

RBN SAVE OFF

Not activated

RBN SAVE ON (LBL)

Activated (When the head lever is set to position 1)

RBN SAVE ON (TAG)

Activated (When the head lever is set to position 2.)

After selecting the ribbon save function, press the [PAUSE] key.

(12) Control Code Selection

This parameter is to choose a Control Code.

When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears.

<2>PARAMETER SET CODE AUTO

Use the [FEED] or [RESTART] key to select a desired option.

[RESTART]

[FEED]

CODE AUTO

CODE ESC,LF,NUL

CODE{}

CODE MANUAL

Automatic selection Manual selection Manual selection

Control codes should be specified.

E2-26