TOSHIBA
Step-by-Step Instructions
Detailed below are the instructions that you should follow in order to connect the Qosmio personal computer to a Sky Digital set top bax and then configure the Windows XP Media Center operating system to receive satellite television broadcasts.
____________________________________________________________________
Part One - Initial Configuration of the Media Center Application
Please note that this section assumes the presence of an Internet connection in order that the subsequent setup and configuration processes can be properly completed, and the Electronic Program Guide (EPG) downloaded - you must therefore ensure that the Qosmio is connected to the Internet before continuing with the following instructions. In addition, please be aware that all of the instructions that are contained within this section have been developed on the assumption that (a) an ‘always on’ broadband (DSL) connection to the Internet is available, and (b) the Media Center infrared remote control receiver box has been connected to one of the Qosmio’s free USB ports.
1) Switch the Qosmio on and allow the Windows XP Media Center operating system to fully load.
2) Press the START button on the Media Center remote controller to start the Media Center application.
3) At the opening Welcome to the Media Center Setup Wizard screen, select Next.
4) At the Media Center Setup screen, select Next.
5) At the Media Center Privacy Policy screen, select Next.
© Toshiba Information Systems (UK( Limited | Page 9 |
