4.10 Cover assembly 4 Replacement Procedures
4.10 Cover assembly Removing the Cover assembly
The following describes the procedure for removing the cover assembly (See Figure 4-14 to
4-18).
1. Turn over the computer and disconnect the GPU fan cable from the connector
CN8781 on the system board.
2. Disconnect the AV-IN cable from the connector PJ650 on the analog TV tuner.
3. Remove the following screws and ODD slot bezel.
• M2.5×4B FLAT BIND screw ×2
GPU fan cable
(
Connected to CN8781
)
AV-IN cable
(Connected to PJ650 on
the analog TV tuner)
M2.5×4B FLAT BIND
ODD slot bezel
Figure 4-14 Removing the cover assembly (1)
QOSMIO F30 Maintenance Manual (960-555) [CONFIDENTIAL] 4-27