Toshiba F30 4.12 LED board

4.12 LED board 4 Replacement Procedures
4.12 LED board
Removing the LED board
The following describes the procedure for removing the sound board (See Figure 4-22).
1. Remove the following screw securing the LED board.
• M2.5×4B FLAT BIND screw ×1
2. Remove the LED board upward from the cover assembly.
3. Disconnect the LED cable from the connector CN9510 on the LED board.
M2.5x4B FLAT BIND
CN9510
(Back of the LED board)
LED board
LED cable
Figure 4-22 Removing the LED board
QOSMIO F30 Maintenance Manual (960-555) [CONFIDENTIAL] 4-37