4 Replacement Procedures 4.11 Touch pad
3. Open the insulator A to which the double-sided tape is stuck and disconnect the
touch pad cable from the TP board.
4. Turn up the insulator B and disconnect the button cable from the touch pad
assembly.
5. Disconnect the button cable from the TP board.
Insulator A
Insulator B Button cable
Touch pad cable
Double-sided tape
Dual Mode touch pad
(Rux pad model)
Insulator A
Insulator B
Button cable
Touch pad cable
Double-sided tape
Touch pad
(Touch pad model)
Figure 4-20 Removing the cables
4-34 [CONFIDENTIAL] QOSMIO F30 Maintenance Manual (960-555)