4 Replacement Procedures 4.34 Latch assembly
4.34 Latch assembly Removing the Latch assembly
The following describes the procedure for removing the latch assembly (See Figure 4-60).
1. Remove the LCD latch knob while releasing latches.
2. Remove the LCD latch hook from the slot.
CAUTION: When removing the LCD latch hook, do not lose the spring.
LCD latch knob
LCD latch hook
Latch
Spring
Figure 4-60 Removing the latch assembly
Installing the Latch assembly
The following describes the procedure for installing the latch assembly (See Figure 4-60).
1. Install the LCD latch hook to the display rear cover
2. Install the LCD latch knob until it is latched.
4-82 [CONFIDENTIAL] QOSMIO F30 Maintenance Manual (960-555)