Toshiba 310, FC-210 - page 164

February 2002 © TOSHIBA TEC 4 - 53 FC-210/310 TROUBLESHOOTING
[CDB] Punch motor abnormal
Is the punch home position sensor (PI3P) working normally?
NO Replace the sensor.
YES
Is the wiring between the punch home position sensor (PI3P) and finisher controller PC board correct?
NO Correct the wiring.
YES
Is the punching mechanism normal?
NO Correct the mechanism.
YES
Is the problem solved by replacing the punch motor (M1P) ?
YES End
NO
Is the problem solved by replacing the punch driver PC board?
YES End
NO
Replace the finisher controller PC board.