Toshiba 310, FC-210 - page 223

FC-210/310 UPDATING THE FIRMWARE 5 - 24 February 2002 © TOSHIBA TEC
In case of target #1 - #5
Firmware Version Up Mode Target:#1
Installing a new firmware.
— reading a file.
Target Version code
l installing
Displays the area being processed.
Firmware Version Up Mode Target: 1
Installing new firmware.
— reading a file.
6. The copier starts updating when the [START] key is pressed.
Do not turn OFF the power of the copier or PC, or disconnect the cable after the [START] key
has been pressed.
Interruption during the file transmisson to the copier will destroy the file in the FROM of the
copier. The data m ust be reinstalled after checking and perf orming the follo wing items.
• Connect the serial cable correctly.
• Restart the copier and PC.
• Change the "War FTP Daemon" to "ONLINE" mode.
• Copy the new files to the PC again.
In case of target 1 - 13 :
Displays the status of updating
process.
– reading file.
– erasing the device.
– writing to the device.
* During writing the data corresponding to the target 11 - 13, the transmission rate is displayed.
- writing to the divice.
xxxxx/XXXXX transmitted / total (byte)