CALLER ID/CALL WAITING
DELETE ALL CALLER ID DATA:
1 Press | CID . |
|
2 Press | DELETE . | to select Yes or No. |
Press | or | |
3 Press | SELECT or | DELETE . |
If you select 
, a confirmation tone sounds and the LCD displays “Total:00”.
If you select 
, the LCD displays the number of Caller ID calls.
4 Press CID to return to the standby mode.
New :01
Total:02
Delete All? Yes
sNo
Total:00
New :01
Total:02
CALL WAITING
The LCD will show another incoming call even if you are on the line. This feature can be enabled or disabled. If enabled, you hear the short beeps at regular intervals until the call is either answered, or the person calling hangs up. With Caller ID on call waiting, you can see who is calling to decide if you want to interrupt your current conversation to answer the incoming call.
WITH CALLER ID SERVICE
1 Before answering a call, check to see that the caller’s name and telephone number are displayed on the screen. To switch to the waiting call, press FLASH on the handset. The first caller is put on hold.
2 To switch back to the first caller, press FLASH again.
NOTE:
Pressing FLASH without having received a Call Waiting signal may disconnect the current line.
Caller ID/Call waiting
31
