QUICK
REFERENCE CALLER ID CORDLESS TELEPHONE
SETTING / USING THE PHONE
CALLER ID SERVICE
GUIDE
Setting The Dial Mode
Depending on your dialing system, set the mode as follows:
Setting Up Caller ID
To use Caller ID/ Caller ID on Call Waiting features, you must subscribe to both Caller
Making a Call with Caller ID Data
1 Press CID , then press | or | to display the number you want to dial. |
Read the Owner’s Manual for details.
SETTING UP THE BASE UNIT
Raise the antenna to vertical position.
|
| ||
Fasten the AC | Telephone Line Cord | Telephone Jack | |
(RJ11C) | |||
adaptor cord. | |||
|
| ||
|
| Power Outlet | |
|
| (AC 120V, 60Hz) | |
| AC Adaptor |
|
NOTE: Plug the AC adaptor firmly into the base unit and the AC 120V outlet.
CHARGING THE BATTERY PACK
Red | Black | 1 | Remove the battery cover by sliding it down. |
|
| 2 | Plug the battery pack cord into its socket, observing |
|
|
| the correct polarity. |
1 | Press and hold | FLASH until you hear a confirmation tone. | ||||||||||
2 | To set the dial mode for pulse dialing, press # / PULSE . Or to set the dial | |||||||||||
| mode for tone dialing press TONE/ |
| . |
|
| |||||||
|
| |||||||||||
| A confirmation tone sounds to indicate the setting is complete. | |||||||||||
|
|
|
|
|
|
|
|
|
|
| ||
| Dial Mode:Pulse |
| Dial Mode:Tone |
| ||||||||
| Tone - Press |
|
|
| Tone - Press |
|
|
| ||||
|
|
| ||||||||||
| Pulse- Press # |
| Pulse- Press # |
| ||||||||
TONE/ |
|
| # / PULSE | |||||||||
| ||||||||||||
|
|
|
|
|
|
|
|
| ||||
| Tone Dialing |
| Pulse Dialing |
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
Area Code
1 | Press | FUNC , then press | 3 . |
|
2 | Press | SELECT and enter a |
| |
3 | Press | SELECT , then press | FUNC . | FLASH |
|
|
|
| |
Making a Call | TALK |
|
ID / Caller ID on Call Waiting services provided by your local telephone company.
| , |
TALK | FLASH |
SELECT | CID |
1 | 3 |
|
2 Press TALK , then displayed number will be dialed.
Note: For long distance calls, you need a prefix “1” and the area code. Press L.D./1 and LOCAL/3 to add or cancel “1” and the area code before pressing TALK .
Storing Caller ID Data to Speed-Dial Memory
1 | Press | CID , then press | or | to display the number you want to store into |
|
|
| ||
2 | Press | MEM , then press | , | or enter a memory location number. |
3 | Press | SELECT . A confirmation beep sounds and the Caller ID data is stored. | ||
| Press | CID to return to standby mode. | ||
Deleting Caller ID Data
1 | Press | CID , then press | or |
| to display the Caller ID number you want to |
| delete from the memory. |
|
|
| |
2 | Press | DELETE , then press |
| or | to select Yes or No. |
3 | Press SELECT or DELETE . |
|
| ||
4 | Press | CID to return to standby mode. | |||
3 | Place the battery pack . Then close the battery |
4 | compartment cover. |
Place the handset on the base unit. You can place | |
| the handset with the dialpad facing up or down. |
1 Dial the phone number .
2 Press TALK .
3 Press TALK to hang up .
SELECT 
3
TONE/
# / PULSE
FUNC
MEM |
DELETE |
Caller ID on Call Waiting
1 Before answering a call, check to see that the caller’s name and telephone number
|
| IMPORTANT |
|
| Charge the battery pack for at least 12 to 16 hours. |
| IN USE/ |
|
Charging contacts | CHARGE |
|
LED |
| |
UCZZ69338BZ | RC012154 | Printed in China |
Answering a Call
Press TALK and speak.
NOTE: To indicate Caller ID data, let the phone ring twice before you answer the call.
are displayed on the LCD. To switch to the other line, press
The first caller is put on hold.
2 To return to the first caller, press FLASH again.
For more detailed instructions and examples, please refer to the owner’s manual.
