Toshiba GD-1220, GD-1221 service manual Discard printing, Bit Discard parameter

[ 1 ] Discard printing

Func. 15 bit 2 permits selecting between ON and OFF of the option for discard extra. Func. 15 bit 2 = 0 : OFF

Func. 15 bit 2 = 1 : ON (Default)

Func. 15 bits 6 and 7 allow the discard parameter to be set. Func. 15 (Default Setting bit 2 = 0, bit 6 = 1, bit 7 = 0)

bit 2	bit 6	bit 7	Discard parameter
0	X	X	Discard OFF
1	0	0	0 mm (Discard OFF)
1	1	0	10 mm
1	0	1	17 mm
1	1	1	34 mm

•When the option for discard extra is ON:

When the length of the received document in the feed direction exceeds the effective recording area and the part exceeding one page is within the discard parameter, printing takes place with the exceeding part discarded. When the length of the received document in the feed direction exceeds the discard parameter range and is within the reduction range of the maximum reduce ratio, vertical reduction print takes place. When it is not within the reduction range of the maximum reduce ratio, divided print takes place. The discard extra takes preference over the vertical reduction print.

Rcv. doc. Rcd. paper

2

A

B

A	A: Effective recording area
	B: Record data length outside
	effective recording area

Fig. 2-2

If the length of B is less than the set discard parameter, B is discarded.

•When the option for discard extra is OFF:

The vertical reduction takes preference without performing discard extra print.

© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved	GD-1220/1221
	LSU-RELATED FUNCTIONS

2 - 7