Toshiba GD-1220, GD-1221 FAX Automatic Switching, General functions, TEL mode, FAX mode

3.3FAX Automatic Switching

3.3.1General functions

There are two types of setting for the FAX Auto-Switching Mode Selection: TEL Mode and FAX Mode.

3.3.2TEL mode

This mode is selected to prioritize telephone communication when the frequency of the fax reception is low. When the TEL mode is selected, the automatic FAX reception function does not work. Therefore, when a calling signal comes from the exchange, the telephone ringer continues ringing until the opera- tor picks up the handset. When the operator has learned that the caller is sending a FAX, he has to per- form the manual reception operation.

3.3.3FAX mode

This mode is selected when the telephone circuit is used only for FAX communication. When the FAX mode is selected and a calling signal comes from the exchange, the FAX reception operation starts automatically without ringing the telephone ringer.

In the FAX mode, a calling number can be set up to 15 calls in the SET FUNCTION (FUNC 14 Bits 7 to 4).

<Method of judging CNG detection>

0.5s 3s

CNG

CNG-on detection T1	CNG-off	CNG-determined
	detection T2

•As shown above, after CNG-on detection time T1 (175 ms) and CNG-off detection time T2 (350 ms) have elapsed, and the T1 period has been turned on and then the T2 period off, CNG is determined to have occurred once.

3

© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved	GD-1220/1221
	DIALING/COMMUNICATION CONTROL

3 - 25