![](/images/new-backgrounds/1203842/20384257x1.webp)
[ 8 ] Received document and selection of recording paper
The procedure for selecting recording paper handled by this machine is briefly described below. Recording paper for reception print is selected according to the print recording paper range and priority as listed in Table 2. A printable print recording paper range is selected according to the scanning width and feed length of the received document. A print recording paper range is selected by taking the dis- card length and feed reduce ratio into consideration.
Shown is an example where an EU model is used, the discard parameter is 10 mm, the feed reduce ratio is max. 75 %, the scanning width of the received image is A4, the number of lines received is STD or 2000 lines. Since the scanning width is A4, the recording paper range to be selected is one of
Since 2000 lines are converted to 519 mm, a feed length to allow 390 mm to be printed on one page with a max. reduce ratio of 75 % is selected. The recording paper length of A4 is 297 mm, the recording paper length of B4 is 364 mm, and the recording paper length of A3 is 420 mm.
Therefore, an A3 paper range covering 390 mm is selected. After an A3 range is selected, recording paper is selected according to the priority in Table 2, followed by printing.
Table 1 Selection of recording paper range
For NAD model
|
|
| Scanning |
|
|
|
|
|
|
|
| 216 mm | 256 mm | 303 mm |
|
|
|
|
|
Feed length | ST (140 mm) |
| COMP | LT |
|
|
|
|
|
| LT (216 mm) | COMP | LT | |
|
|
|
|
|
| COMP | LD | ||
|
|
|
|
|
| LG/COMP (356 mm) | LG | COMP | LD |
|
|
|
|
|
| LD (432 mm) | LD | LD | LD |
|
|
|
|
|
| Long original (over 432 mm) | LT (long) | COMP (long) | LD (long) |
|
|
|
|
|
For MJD, AUD, ASD, SAD, TWD, CND models
|
|
| Scanning width |
|
|
|
|
|
|
|
| 216 mm | 256 mm | 303 mm |
|
|
|
|
|
Feed length | A5 (148.5 mm) | B5 | A4 | |
|
|
|
|
|
| B5 (182 mm) | B5 | A4 | |
|
|
|
|
|
| A4 (210 mm) | B4 | A4 | |
|
|
|
|
|
| B4 | A3 | ||
|
|
|
|
|
| FOLIO (330 mm) | FOLIO | B4 | A3 |
|
|
|
|
|
| B4 (364 mm) | B4 | B4 | A3 |
|
|
|
|
|
| A3 (420 mm) | A3 | A3 | A3 |
|
|
|
|
|
| Long original (over 421 mm) | A4 (long) | B4 (long) | A3 (long) |
|
|
|
|
|
*When there is no recording paper which received data can be printed on one sheet of, the maximum paper loaded in the equipment is selected and data is divided and printed on two or more sheets
without reduction. (Refer to | P. |
2 |
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved | |
|
2 - 11