Toshiba GD-1210 Selection of the communication mode, Procedure to select the transmission mode

3.1.2Selection of the communication mode

This machine has three types of communication mode. The mode to be used is determined according to the combination of the types of the circuits and communication and available function of the other side’s machine.

	Communication mode
	Toshiba original procedure	ECM	G3
Telephone circuit	{	{	{

3.1.3Procedure to select the transmission mode

START

		*1
Other side machine has the			YES
Toshiba original
procedure mode?
	NO

Other side machine has	YES
ECM mode?

NO

YES

Other side machine has G3 mode?

Communication using the Toshiba original procedure

ECM communication

G3 communication

*1 This step is only checked when the other side machine has CRP2 (+ CRP1) or when the trans-

:mission is started by the CRP calling. (The first transmission to the other side with CRP1 only is performed in the ECM mode.)

GD-1210/1250/1270/1160/1260	© 2006 - 2011 TOSHIBA TEC CORPORATION All rights reserved
DIALING/COMMUNICATION CONTROL

3 - 2