Toshiba GD-1270 Communication end procedure, Receiver, Signal name, Abbreviation, Function

-Communication end procedure

This procedure is to terminate the communication. The transmission rate is 1,200 bps. Transmitter

Signal name			Abbreviation		Function	Remarks
Sh signal			Sh		Short training
		signal
	Sh		Sh
ALT signal			ALT		-
E sequence				E	-
End of procedure signal			PPS-EOP		The transmission of one page
					is completed.
	Flag		flags		Maintains the synchroniza-	7E (H)
					tion.
Disconnection signal			DCN		Informs to disconnect the line.

Receiver

Signal name			Abbreviation		Function	Remarks
Sh signal			Sh		Short training
		signal
	Sh		Sh
ALT signal			ALT		-
E sequence				E	-
	Flag		flags		Maintains the synchroniza-	7E (H)
					tion.
Message confirmation			MCF		Indicates that the image sig-
					nal is received normally, and
					the receiver is ready to
					receive the next page.

GD-1210/1250/1270/1160/1260	© 2006 - 2011 TOSHIBA TEC CORPORATION All rights reserved
DIALING/COMMUNICATION CONTROL

3 - 20