Display | Meaning |
|
|
AWB OK | Automatic white balance adjustment finished correctly. |
|
|
AWB NG | Automatic white balance adjustment cannot be performed because the video level |
LEVEL LOW | is too low. |
| Adjust the camera for a proper video level. |
|
|
AWB NG | Automatic white balance adjustment cannot be performed because the video level |
LEVEL HIGH | is too high. |
| Adjust the camera for a proper video level. |
|
|
AWB NG OUT | Automatic white balance adjustment cannot be performed because the color |
OF RANGE | temperature of the light source is out of the adjustable range. |
| If the message appears, change the illumination or use a color temperature |
| conversion filter. |
|
|
AWB NG | Automatic white balance adjustment cannot be performed for other reasons (such |
| as no white area is included in an object). |
|
|
6.2.2 MANUAL (Manual white balance)
•Set the MODE to MANUAL on the WHT BAL setting screen. (Refer to the item “7.4 “WHT BAL (White Balance)””)
•Shoot a white object, and adjust the white balance by adjusting R GAIN and B GAIN on the setting screen while confirming with a monitor or a vector scope.
(Refer to the item “7.4.3 When Changing Settings in MANUAL (manual white balance mode)”)
6.3SCENE files
This unit has three SCENE files A, B and C selectable according to the shooting conditions.
•Select a scene set up on the OPTION screen (refer to the item 7.6 (2) “To change settings of SCENE files”).
In this case, the set contents written into internal memory of this camera are loaded.
•After that, each time setting is changed on the screen display, the contents of the change are written into memory and memorized even if the power source is turned off.
•To set SCENE files to factory setting status, press both the [MENU DOWN] and [DATA DOWN] buttons at a time for approximately five seconds while the screen display and color bar are turned off. The character “RESET OK” is displayed for approximately one second, and the selected SCENE file is initialized to factory setting status.
- 16 -
