10.NOTES ON USE AND INSTALLATION :

Do not aim the camera at the sun

Do not aim the camera at the sun or point it at sun even if you are not shooting.

Do not shoot intense light

Intense light such as a spotlight may cause a bloom or smear. A vertical stripe may appear on the screen. However, this is not a malfunction.

Treat the camera with care

Do not drop the camera or subject it to strong shock of vibration. Otherwise, the camera may malfunction.

Never touth internal parts

Do not touch the internal parts of the camera other than the parts specified. Otherwise, the camera may malfunction.

Do not splash water on the camera

Install the camera where the camera can be kept dry. If the camera gets wet, turn off the power and contact your dealer.

Install the camera

Where no video noise appears.

If cables are wired near electric lighting wires or a TV set, noise may appear in images. In this event, relocate cables or reinstall equipment.

Check the ambient temperature and humidity

Avoid using the camera where the temperature is hotter or colder than specified. Otherwise, the quality of images may deteriorate or internal parts may be affected. Special care is required to use the camera at high temperature and humidity.

Should you notice any trouble

If any trouble occurs while you are using the camera, turn off the power and con- tact your dealer. If you continue to use the camera when there is something wrong with it, the trouble may much worse and an unpredictable accident may occur.

26

Page 26
Image 26
Toshiba IK-65WDA Do not aim the camera at the sun, Do not shoot intense light, Treat the camera with care