6.LINE-LOCK PHASE :

When a video switcher switches two or more cameras, the picture may fluctuate on the video monitor due to the different AC line phase of each camera. In this case, adjust the V PHASE controller (on rear panel) to get a stable image.

The camera is in the Line-Lock Mode. Line-Lock phase is set 0-300 degrees by adjusting the V phase control at the rear of the camera.

V. PHASE CONTROLLER

7.DIP SWITCH SETTINGS :

The following settings can be performed by setting the rear dip switches.

7.1 LINE LOCK (DIP1) : ON/OFF

The line lock functions with AC24V power and the switch on the ON side.

7.2 IRIS (DIP2) : AES/DC

AES/DC select switch.

AES (ON side) : Auto electronic shutter function.

DC (OFF side) : When using AI lens without amp.

7.3 WDR (DIP3) : ON/OFF

With this switch ON, wide dynamic range func- tion (WDR) is activated.

When WDR function is activated, the video of each Field is mixed. When this happens, verti- cal resolution And the number of the frames decrease slightly.

9

Page 9
Image 9
Toshiba IK-65WDA instruction manual LINE-LOCK Phase, DIP Switch Settings, Iris DIP2 AES/DC, WDR DIP3 ON/OFF