Changing the setting in PW SNR mode | Toshiba IK-TF5U specs

(1. 3. 3) Changing the setting in PW SNR mode

Move up down					Select the desired
by pushing					value by pushing
MENU UP, DOWN					DATA UP, DOWN

-- SHUTTER --
MODE	E.TRG
E.TRG	PW SNR
TRG.P
PART	OFF

<MODE = E.TRG E.TRG = PW SNR>

•Sutter mode MANU, SS, E.TRG

•E.TRG mode

1P SNR, 1P SR, PW SNR, PW SR, RR

•Input trigger pulse setting at PW SNR and PW SR

Input trigger pulse : positive polarity

Input trigger pulse : negative polarity

•Partial scanning switch OFF/90fps/115fps/120fps/160fps/180fps/240fps/ E90fps/E115fps/E120fps/E160fps/E180fps/E240fps

(a) Changing the polarity of inputting trigger pulse setting

1Move the "→" to TRG.P by pushing [MENU UP], [MENU DOWN] buttons.

2Select either , by pushing [DATA UP], [DATA DOWN] buttons.

(b) Changing the partial scanning setting

1Move the "→" to PART by pushing [MENU UP], [MENU DOWN] buttons.

2Select the mode by pushing [DATA UP], [DATA DOWN] buttons.

Note:

The longer the storage time with extended exposures, the more visible certain characteristics of CCD cameras become: fixed pattern noise, white pixels, etc.

18

Image 18

Toshiba IK-TF5U instruction manual Changing the setting in PW SNR mode, Mode = E.TRG E.TRG = PW SNR

Contents

IK-TF5U Following information is only for EU-member states Safety Precautions Disclaimer Avoid placing in humid, smoky, vaporized or dusty places Table of Contents Components Names and Functions Connector Pin Assignments ConnectionStandard Connection Operation Automatic Black BalanceWhite Balance Result displayed Meaning Temp LOW Gain Shading CorrectionOFF Items Controlled by the Screen Display Available selections Mode Setting by the Screen Display Using the MenusDisp Manual MenusShutter Electronic shutter Flicker may be large Partial scanning setting Changing the setting in Manu modeMode = Manual Menu UP, Down Data UP, Down Changing the setting in SS synchro. scan mode Mode = SSChanging the shutter speed setting Changing the polarity of inputting trigger pulse setting Changing the setting in E.TRG modeChanging the setting in 1P SNR mode Changing 1P SNR exposure time setting Changing the setting in 1P SR mode Mode = E.TRG E.TRG = 1P SRChanging 1P SR exposure time setting Changing the setting in PW SNR mode Mode = E.TRG E.TRG = PW SNR Changing the setting in PW SR mode Mode = E.TRG E.TRG = PW SRMode = E.TRG E.TRG = RR Changing the setting in Gain Changing the gain in Manu modeGain Video gain WHT BAL White balance Changing master pedestal MANU/OFFChanging gamma correction Changing R pedestal Sync Option Setting by 1H Setting by the frameReturning to factory settings Synchro. Scan Operation E. TRG External trigger 1P SNR 1 Pulse Trigger Sync Non Reset1 Pulse Trigger SYNC-NON Reset Picture Output Timing Fval Lval Dval 1P SR 1 Pulse Trigger Sync Reset 1 Pulse Trigger SYNC-RESET Picture Output Timing PW SNR Pulse width trigger SYNC-NON Reset Pulse Width Trigger SYNC-NON Reset Picture Output Timing PW SR Pulse width trigger SYNC-RESET 1 Pulse Width Trigger SYNC-RESET Picture Output Timing RR Reset restart Input Timing Chart ExampleLong Term Exposure Partial Scanning OFF All pixels scanning When Partial Scanning Mode is onPartial Read Partial Scanning on External Sync External sync signal polarityUsing the unit with external sync signal External sync frequency range Input Output Signal Specificatoins CCD Output Waveform Timing Chart Horizontal Output Waveform Timing ChartVertical Output Waveform Timing Chart Specifications RGB, 3CCD External Appearance Diagram Before Making a Service CallSymptom Items to be checked How to Obtain Warranty Service Step-By-Step Procedures Limited Warranty Toshiba CCD CameraOne 1 Year Limited Warranty of Labor and Parts Your Responsibilities