Specifications, RGB, 3CCD | Toshiba IK-TF5U guide

10. SPECIFICATIONS

Power supply	12V DC±10%
Power consumption	Approx. 6.1W
Pick-up system	RGB, 3CCD
Image sensor	1/3inch All pixels CCD
	(Effective pixels Horizontal : 659, Vertical : 494)
Scanning System	Progressive scan
Video output pixels	Horizontal pixels : 659, Vertical : 494
Pixel clock frequency	24.5454MHz
Sync signal frequency	Horizotal : 31.469KHz, Vertical : 59.94Hz
Sync system	Internal/External (Automatic switching)
Sensitivity	F6.8 standard (2000 lx, 3000K)
Minimum illumination	14 lx (F2.2, Sensitivity + 18 dB, 3000K)
Lens mount	C mount (flange back : 17.526 mm in-air)
Ambient temperature	0 to 40°C (32 to 104°F)
Ambient humidity	Less than 90%
Weight	Approx. 160g (0.353lbs)
External dimension	44 (W) x 44 (H) x 78 (D) mm
	(1.73” (W) x 1.73” (H) x 3.07” (D)) (except for protruded portion)
White balance	AWB (Automatic white balance), MANUAL (Manual)
Gain	MANUAL (Manual), OFF (0 dB)
Partial scanning	90fps, 115fps, 120fps, 160fps, 180fps, 240fps
Output signal	8-bit RGB, Digital output (Camera Link format)
Sync signal output	FVAL, LVAL, DVAL (Positive polarity)
	Pixel Clock
External sync input	HD : CC3 (LVDS input) Negative polarity
	VD : CC4 (LVDS input) Negative polarity
External trigger input	CC1 (LVDS input), More than 2 ∝s pulse width
Partial scanning control	CC2 (LVDS input)
signal input
Interface	Serial data interface : Ser TC (RXD), Ser TFG (TXD)
Optional parts	IK-TF5H (CAMERA HEAD) EXC-CL05S (Cable), etc

The designs and specifications are subject to change without notice.

34

Image 34

Toshiba IK-TF5U instruction manual Specifications, RGB, 3CCD

Contents

IK-TF5U Following information is only for EU-member states Safety Precautions Disclaimer Avoid placing in humid, smoky, vaporized or dusty places Table of Contents Components Names and Functions Connection Connector Pin AssignmentsStandard Connection Automatic Black Balance OperationWhite Balance Result displayed Meaning Temp LOW Shading Correction GainOFF Items Controlled by the Screen Display Available selections Using the Menus Mode Setting by the Screen DisplayDisp Manual MenusShutter Electronic shutter Flicker may be large Partial scanning setting Changing the setting in Manu modeMode = Manual Menu UP, Down Data UP, Down Mode = SS Changing the setting in SS synchro. scan modeChanging the shutter speed setting Changing the polarity of inputting trigger pulse setting Changing the setting in E.TRG modeChanging the setting in 1P SNR mode Changing 1P SNR exposure time setting Mode = E.TRG E.TRG = 1P SR Changing the setting in 1P SR modeChanging 1P SR exposure time setting Changing the setting in PW SNR mode Mode = E.TRG E.TRG = PW SNR Mode = E.TRG E.TRG = PW SR Changing the setting in PW SR modeMode = E.TRG E.TRG = RR Changing the gain in Manu mode Changing the setting in GainGain Video gain WHT BAL White balance Changing master pedestal MANU/OFFChanging gamma correction Changing R pedestal Sync Option Setting by 1H Setting by the frameReturning to factory settings Synchro. Scan Operation E. TRG External trigger 1P SNR 1 Pulse Trigger Sync Non Reset1 Pulse Trigger SYNC-NON Reset Picture Output Timing Fval Lval Dval 1P SR 1 Pulse Trigger Sync Reset 1 Pulse Trigger SYNC-RESET Picture Output Timing PW SNR Pulse width trigger SYNC-NON Reset Pulse Width Trigger SYNC-NON Reset Picture Output Timing PW SR Pulse width trigger SYNC-RESET 1 Pulse Width Trigger SYNC-RESET Picture Output Timing Input Timing Chart Example RR Reset restartLong Term Exposure Partial Scanning OFF All pixels scanning When Partial Scanning Mode is onPartial Read Partial Scanning on External Sync External sync signal polarityUsing the unit with external sync signal External sync frequency range Input Output Signal Specificatoins Horizontal Output Waveform Timing Chart CCD Output Waveform Timing ChartVertical Output Waveform Timing Chart Specifications RGB, 3CCD Before Making a Service Call External Appearance DiagramSymptom Items to be checked How to Obtain Warranty Service Step-By-Step Procedures Limited Warranty Toshiba CCD CameraOne 1 Year Limited Warranty of Labor and Parts Your Responsibilities