Names and Functions | Toshiba IK-TF5U instruction

3. NAMES AND FUNCTIONS

1Camera cable for ‘IK-TF5H’ terminal

(AWB)

DISP

MENU DATA

DC IN 12V

PAGE

8DC IN 12V terminal

2DISP button

4MENU UP button

6DATA UP (AWB) button

7DATA DOWN button

		5	MENU DOWN button
	3 PAGE button	9	DIGITAL terminal
[ Front ]		[ Rear ]
10	11

[ Bottom ]
1 Camera cable for ‘IK-TF5H’ terminal	Where the camera cable for ‘IK-TF5H’ is connected.
2 DISP button	To change the display mode.
3 PAGE button	To switch and select menus.
4 MENU UP button	To select the function to be confirmed or changed on the menu.
5 MENU DOWN button	To select the function to be confirmed or changed on the menu.
6 DATA UP (AWB) button	To change the value of the function selected by the MENU (UP/DOWN)
	button. (Also used when using AWB.)
7 DATA DOWN (ABB) button	To change the value of the function selected by the MENU (UP/DOWN)
	button. (Also used when using ABB)
8 DC IN 12V terminal	Accept a DC power input (12V).
9 DIGITAL terminal	8-bit RGB, digital signal, and sync signal are output in the Camera
	Link format.
	Trigger signal is input.
	Mode switching signal for partial scanning is input.
	Accepts serial communication control signal.
! Mounting holes M3	Used to fix the camera.
" Mounting holes M2	Used to fix the camera.

6

Image 6

Toshiba IK-TF5U instruction manual Names and Functions

Contents

IK-TF5U Following information is only for EU-member states Safety Precautions Disclaimer Avoid placing in humid, smoky, vaporized or dusty places Table of Contents Components Names and Functions Connector Pin Assignments ConnectionStandard Connection Operation Automatic Black BalanceWhite Balance Result displayed Meaning Temp LOW Gain Shading CorrectionOFF Items Controlled by the Screen Display Available selections Mode Setting by the Screen Display Using the MenusDisp Manual MenusShutter Electronic shutter Flicker may be large Partial scanning setting Changing the setting in Manu modeMode = Manual Menu UP, Down Data UP, Down Changing the setting in SS synchro. scan mode Mode = SSChanging the shutter speed setting Changing the polarity of inputting trigger pulse setting Changing the setting in E.TRG modeChanging the setting in 1P SNR mode Changing 1P SNR exposure time setting Changing the setting in 1P SR mode Mode = E.TRG E.TRG = 1P SRChanging 1P SR exposure time setting Changing the setting in PW SNR mode Mode = E.TRG E.TRG = PW SNR Changing the setting in PW SR mode Mode = E.TRG E.TRG = PW SRMode = E.TRG E.TRG = RR Changing the setting in Gain Changing the gain in Manu modeGain Video gain WHT BAL White balance Changing master pedestal MANU/OFFChanging gamma correction Changing R pedestal Sync Option Setting by 1H Setting by the frameReturning to factory settings Synchro. Scan Operation E. TRG External trigger 1P SNR 1 Pulse Trigger Sync Non Reset1 Pulse Trigger SYNC-NON Reset Picture Output Timing Fval Lval Dval 1P SR 1 Pulse Trigger Sync Reset 1 Pulse Trigger SYNC-RESET Picture Output Timing PW SNR Pulse width trigger SYNC-NON Reset Pulse Width Trigger SYNC-NON Reset Picture Output Timing PW SR Pulse width trigger SYNC-RESET 1 Pulse Width Trigger SYNC-RESET Picture Output Timing RR Reset restart Input Timing Chart ExampleLong Term Exposure Partial Scanning OFF All pixels scanning When Partial Scanning Mode is onPartial Read Partial Scanning on External Sync External sync signal polarityUsing the unit with external sync signal External sync frequency range Input Output Signal Specificatoins CCD Output Waveform Timing Chart Horizontal Output Waveform Timing ChartVertical Output Waveform Timing Chart Specifications RGB, 3CCD External Appearance Diagram Before Making a Service CallSymptom Items to be checked How to Obtain Warranty Service Step-By-Step Procedures Limited Warranty Toshiba CCD CameraOne 1 Year Limited Warranty of Labor and Parts Your Responsibilities