( 4 ) PROCESS
•Gamma Correction (GAMMA)
Select either OFF or ON of Gamma Correction.
•Master Pedestal (M. PED)
Adjust the Pedestal level of each RGB.
•R Pedestal (R. PED)
Adjust the Pedestal level of Red.
•B Pedestal (B. PED)
Adjust the Pedestal level of Blue.
•Shading Correction (SHAD.)
Due to the lens used or the environmental condition, vertical color shading may occur at the top and bottom of the screen. In this case, the shading correction can decrease the color shading. For the shading correction of the unit, MANU (Manual shading correction) and OFF (no shading correction) modes are provided.
1MANU (Manual Shading)
Adjust the correction amount on the PROCESS menu by confirming with a monitor or a waveform monitor.
2OFF
The status is no shading correction.
*The shading correction is effective when the lens iris or zoom ratio is fixed. Use the unit with SHAD. OFF for variable lens conditions.
Move up down by pushing
MENU UP, DOWN
Select the desired value by pushing
DATA UP, DOWN
|
|
|
|
|
|
| • Gamma correction ON/OFF | ||
|
| GAMMA | OFF |
|
|
| • Master pedestal adjustment | ||
|
|
|
|
| • R pedestal adjustment | ||||
|
| M.PED | 0 |
|
|
|
| ||
|
| ||||||||
|
| R.PED | 0 |
|
|
|
| • B pedestal adjustment | |
|
|
| |||||||
|
| B.PED | 0 |
|
|
|
| ||
|
|
|
|
|
|
|
| ||
|
| SHAD. | MANU |
|
|
|
| • Shading mode setting | MANU/OFF |
|
|
|
| ||||||
|
| MANU | 0 |
|
|
|
|
|
|
|
|
|
| ||||||
• Manual shading adjustment
(4. 1) Changing gamma correction
1Move the "→" to GAMMA by pushing [MENU UP], [MENU DOWN] buttons.
2Select the gamma correction by pushing [DATA UP], [DATA DOWN] buttons.
(4. 2) Changing master pedestal
1Move the "→" to M. PED by pushing [MENU UP], [MENU DOWN] buttons.
2Adjust the master pedestal by pushing [DATA UP], [DATA DOWN] buttons.
(4. 3) Changing R pedestal
1Move the "→" to R. PED by pushing [MENU UP], [MENU DOWN] buttons.
2Adjust the R pedestal by pushing [DATA UP], [DATA DOWN] buttons.
(4. 4) Changing B pedestal
1Move the "→" to B. PED by pushing [MENU UP], [MENU DOWN] buttons.
2Adjust the B pedestal by pushing [DATA UP], [DATA DOWN] buttons.
22
