IPedge
The Basics
28 TOSHIBA IPedge UG 06/11
LED Indicator Details Each line and Programmable Feature Button has a LED next to it
which indicates the status of the line or feature associated with the
button. Line LEDs light red or green and flash at varying rates to
indicate call status (see Table 5).
Note: LEDs on the telephone flash at different speeds depending on the
function performed. Flash rates can be found under “LED Indicator
Details” on page 2-28.
Table 5 LED I ndica tors
LED Your Station (Green) Other Station (Red)
Interval Rates
Extension In-Use
(access outside line)
2 seconds On, 1/8 second Off
— 1/8 second On/Off
steady
Incoming Call
(while ringing)
1 second on at 10 pulses/sec-
ond —1 second Off
one second On/Off
Hold (outside line) If using Pooled Line
Grp, the hold indication is only at the
station that places the call on hold.
4 pulses/second for 1/8 second
On/Off
1/2 second On/Off
Hold – Consultation
(during consultation/transfer to another
station)
10 pulses/second steady
Hold – Exclusive (outside line) 10 pulses/second steady
Hold – Recall
(when held call recalls your idle station)
1 second at 2 pulses/second,
1 second at 10 pulses/second
flashes
Hold – Exclusive Recall 1 second at 2 pulses/second,
1 second at 10 pulses/second
steady
Internal Call
(while station ringing)
Your extension button flashes
10 pulses/second—1 second
Off
[SDN] red flashing or
green ringing
Busy Station Transfer
(outside call transferred to your busy
station from a designated station or AA)
4 pulses/second, 1/8 second
On/Off
3/4 second on, 1/8 sec-
ond Off
After disconnecting first call... 10 pulses/second 2 pulses/second
Conference 10 pulses/second steady