Operating Basics
Microphone level
If you have an external microphone connected, you can change the microphone gain. Follow the steps below.
1.Click start, point to All Programs, point to Accessories, point to Entertainment and click Volume Control.
2.Click Options and point to Properties.
3.Select Realtek HD Audio Input and enable Recording Control, Mic Volume and Stereo Mix. Then click OK.
4.Click options and point to Properties. Select Realtek HD Audio Output and enable Mic Volume and click OK.
5.Click Advanced.
6.Check the Microphone Boost checkbox.
Advanced Controls is a Microphone Boost icon. Once this item is checked, you will find Advanced icon beside Mic Volume. With this, the input signal into Mic Volume will be strengthen.
Modem
This section describes how to connect and disconnect the internal modem to and from a telephone jack.
The internal modem does not support voice functions. All data and fax functions are supported.
■In case of a lightning storm, unplug the modem cable from the telephone jack.
■Do not connect the modem to a digital telephone line. A digital line will damage the modem.
Region selection
Telecommunication regulations vary from one region to another, so you will need to make sure the internal modem's settings are correct for the region in which it will be used.
To select a region, follow the steps below.
1.Click start, point to All Programs, TOSHIBA, Networking, and click Modem Region Select.
Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available. If you change the Country/ Region in the Control Panel, the change may not take effect.
User’s Manual |