Operating Basics

5.After choosing the menu template, click the Next button to go to the Burning Page.

6.Choose the output type and then click the Burn button.

How to learn more about Corel DVD MovieFactory

Please refer to the Help and Manual files for additional Corel DVD MovieFactory information.

■Opening the Corel DVD MovieFactory Manual

Start ->All Programs ->DVD MovieFactory for TOSHIBA ->DVDMovieFactory User Manual

Important information for use

Note the following limitations when you write Video DVD or Blu-ray disc Movie:

1.Editing digital video

■Log in with Administrator rights to use DVD MovieFactory.

■Make sure that your computer is running on AC power when using DVD MovieFactory.

■Operate the computer at Full Power. Do not use power-saving features.

■While you are editing DVD, you can display preview. However, if another application is running. The preview might not display properly.

■DVD MovieFactory cannot edit or play copy protected content.

■Do not enter Sleep or Hibernation Mode while using DVD MovieFactory.

■Do not operate DVD MovieFactory immediately after turning on the computer. Please wait until all Disc Drive activity has stopped.

■When recording to a DV-Camcorder, to ensure you capture all of your data, let the camcorder record for a few seconds before you begin recording your actual data.

■CD recorder, DVD-Audio, mini DVD and Video CD functions are not supported in this version.

■While recording video to DVD, please close all other programs.

■Do not run software like a screen saver because it can put a heavy load on the CPU.

■Do not support mp3 decode and encode.

2.Before recording the video to DVD or Blu-ray disc

■When you record DVD disc or Blu-ray disc, please use only discs recommended by the Drive manufacturer.

■Do not set the working drive to a slow device like a USB1.1 hard disk drive or it will fail to write DVD or Blu-ray disc.

■Do not perform any of the following actions:

User’s Manual

4-19