Troubleshooting

Check the type of CD/DVD/BD you are using.The drive supports:
BD-Combo:BD-ROM, BD-ROM DL, BD-R,

 

BD-R DL, BD-RE, BD-RE DL
DVD-ROM:DVD-ROM, DVD-Video, DVD-R,

 

DVD-RW, DVD+R, DVD+RW,

 

DVD-RAM

CD-ROM:CD-DA, CD-Text, Photo CD

 

(single/multi-session), CD-ROM

 

Mode 1, Mode 2, CD-ROM XA

 

Mode 2 (Form1, Form2), Enhanced

 

CD (CD-EXTRA),
Recordable disc: CD-R, CD-RW, DVD-R, DVD-RDL, DVD-RW, DVD+R, DVD+R DL,DVD+RW, DVD-RAM, BD-R, BD-RDL, BD-RE, BD-RE DL

Check the region code on the disc. It must match that on the BD drive. Region codes are listed in the Optical disc drives section in Chapter 2, The Grand Tour.

Cannot write correctly If you have trouble in writing, make sure you have taken the following precautions:

Use only media recommended by TOSHIBA. Do not use the mouse or keyboard while writing.

Use only the software supplied with the computer for recording.

Do not run or start other software while writing. Do not jar the computer while writing.

Do not connect/disconnect external devices or install/remove internal cards while writing. If problems persist, contact your dealer.

Memory Cards: SD/SDHC/SDXC Card, Memory Stick/Memory Stick PRO, MultiMediaCard

For further information, please refer to Chapter 3, Hardware, Utilities and Options.

Problem

Procedure

Memory Card errorRemove the Memory Card from the computer
occursand then reinsert it in order to ensure it is firmly

 

connected.

 

If the problem persists, then you should refer to

 

the documentation supplied with your Memory

 

Card for further information.

 

 

User’s Manual

8-11