Using Stratagy ES with a Strata CIX
Call Forward
82 Stratagy ES User Guide 07/09
To use the Call Forward button sequence
Follow the instructions in Table 1 below shown under “Button Sequence.” Some
features require additional input, such as:
•Destination – If the destination is an outside number, press # after entering the
destination. The CIX/CTX accepts destination numbers of up to 32 digits.
•Timer – This is a two digit entry representing how long (8 to 160 seconds) your
telephone should ring before forwarding the call. If you enter one digit, you
must press # after entering the single digit.
Also, in the following table, (Tone) means that a confirmation tone plays at that point
in the sequence.
Table 1 Call Forward Procedures
Feature Button Sequence
Call Forward - Station
Call Forward Any Call (Internal and Incoming Line)
All Call Press Extension button + #6011 (Tone) + Destination No. (Tone)
Busy Press Extension button + #6021 (Tone) + Dest. No. (Tone)
No Answer Press Extension button + #6031 (Tone) + Dest. No. (Tone) + Timer + #
Busy No Answer Press Extension button + #6041 + Dest. No. + Timer + #
Cancel Press Extension button + #6051 (Tone)
Call Forward - System
Call Forward - Incoming Line Calls
All Calls Extension button + #6013 (Tone) + Dest. No. (Tone)
Busy Extension button + #6023 (Tone) + Dest. No. (Tone)
No Answer Extension button + #6033 + Dest. No. (Tone) + Timer (Tone) + #
Busy No Answer Extension button + #6043 + Dest. No. (Tone) + Timer (Tone) + #
Cancel Extension button + #6053 (Tone)
Call Forward - System
Activate #620 (Tone)
Cancel #621 (Tone)