Recording a TV Program | Toshiba MV13P3 instruction

RECORDING A TV PROGRAM

RECORDING AND VIEWING THE SAME TV PROGRAM

1 To turn on the TV/VCR, press POWER.

2	Load a cassette tape with the erase prevention
	tab intact.

POWER

3

MENU

		7
	PROGRAM	CALL
	PROGRAM	0
	RECTIMER	SPEED
		REC
VOL	CH+
–	CH+

		CLOSED
		CAPTION	INPUT
	1		INPUT
			SELECT
4		2
		2
	5		3
8			3		SKIP
8		6			SKIP
		6	TV		SEARCH
	9		TV	MONITOR
	9			MONITOR
	CHANNEL	RESETCOUNTER
RETURN		RESETCOUNTER
ZERO		SLEEP
RETURN	CANCEL	SLEEP
MUTE	CANCEL
MUTE

POWER

1

STOP

EJECT

DIGITAL				–
TRACKING			CH	–	VOL+
–					VOL+
INDEX	–	TRACKING			ENTER
+		TRACKING			ENTER
+
REW		+
REW		PLAY		PAUSE
		PLAY

			/STILL
STOP		FF
		FF

3	Press SPEED to select the desired tape speed
	SP or SLP. The counter and SP or SLP will ap-

pear on the screen about 4 seconds.

SPEED

00:00:00 SP

4	Set the TV/CABLE selection to the appropriate
	Set the TV/CABLE selection to the appropriate
	position (see page 22).

TV - VHF/UHF channels

CABLE - Cable TV channels

NOTES: • If power is switched off during recording, the TV set goes off and the VCR continues to record. Press STOP to halt the recording and turn off the VCR.

•The TV/VCR Channel cannot be changed during recording.

39

5L80301C P34-43

39

20/4/04, 16:29

Image 41

Toshiba MV13P3 owner manual Recording a TV Program, Recording and Viewing the Same TV Program

Contents

MV13P3 TV/CABLE Mode Selection Risk of Electric Shock Do not Open Accessories CleaningPower Source Grounding or Polarization Read Instructions Power Lines POWER-CORD ProtectionReplacement Parts Lightning NEC Section Safety CheckHeat Features Table of Contents When YOU Experience the Above Conditions Safety PrecautionsMoisture Condensation Moisture will Condense on the Unit in the Following Cases Wider Hole and Blade AC Outlet Power SourceTo USE AC Power Front Rear Location of ControlsDescription of Controls Front Speed button Sets the tape speed for recording Remote ControlCursor Selects an item in the menu Battery Precautions Battery InstallationEffective Distance of the Remote Control Feet Jack Antenna ConnectionsOhm matching transformer Antenna Jack Combiner UHF 300 ohm VHF 300 ohm Cable TV Connections For Subscribers to Basic Cable TV ServiceFor Subscribers to Scrambled Cable TV Service Enter Starting Setup Setting the Language Auto Clock Setting Auto Clock SettingAuto Clock Adjustment To SET Auto Clock to OFF Press MENU. Press Bor a to select option Auto for automatic setting read EDS in the signalPress or to select Daylight Saving TIME, then press a Menu screen is cleared Press Bor Ato set Manual Clock SettingMonth, then press As in , then press Adjust the volume level by Press PowerTV Operation Cable TV Channels Mute CallChannel + Mute Sleep Closed Caption Channel ReturnSleep Closed Caption To View Closed Captions What is Closed CAPTIONING?Closed Captioning with a VCR TV/CABLE Selection Cable TV chartTo Memorize Channels Numbers will remain red until auto memorizing is complete Automatic Memory TuningThen press a Channel selection To ADD/DELETE Channels To Register Password Setting the V-CHIPEnter the same password Using Direct channel To SET the V-CHIP To use the TV after the TV is protected Enter To Change Password Press B or Ato select ON/OFF TIMER, then To SET the on TimerOn TIMER, then press a Option Press a Option Press a To SET the OFF TimerPress Bor Ato select Selection Pressing Picture Control AdjustmentsCancel Mode Picture Quality Adjusting the Picture PreferencePress B or a to select option PREFERENCE, then press a Press or to select the desired picture Loading and Unloading a Video Cassette Automatic Power on and PlayLoading Unloading SP Standard Play To Prevent Accidental Erasure To Record AgainTape Speed and Maximum PLAYBACK/RECORDING Time To Start Playback PlaybackStop To Stop Playback REW Digital Tracking ControlsTo Rewind or Forward the Tape Rapidly FORWARD/REVERSE Picture Search Stop Special PlaybackSkip Search PAUSE/STILL Press Bor Ato select on Over until the repeat mode is canceledTo Watch a Tape Repeatedly Recording and Viewing the Same TV Program Recording a TV Program To Stop Recording To Stop Recording Temporarily Screen and the REC indicator will lightPress Direct channel selection 0-9orCH + Ple Channel Press Direct channel ONE-TOUCH Timer Recording OTR Press or to select Timer REC SET Timer RecordingPosition, then press Enter Press the or to select the program Speed as in step Timer REC indicator will lightPress Enter Steps 3 to 6 to set the second program Cancel Other Functions for the Timer RecordingTo Cancel a Program If the Program Program Display the elapsed time Using the Real Time Tape CounterTo View the Counter Display Before playback or recording, press Using Zero Return000000 Press Zero Return Index search TV MonitorTo Monitor a TV Program Connection to Camcorder Duplicating a Video TapeConnection to Another VCR Reception Disturbances Check the following chart before requesting service Problem and Troubleshooting GuideSymptom Cause Possible Solution Power No power Remote Control Symptom Cause Possible SolutionDepressed To turn on the closed caption Recording Video Head Cleaning Video Head CleaningVideo Head Clogging Television Limited One 1 Year Warranty Limited Ninety 90 Day WarrantyLimited Two 2 Year Warranty of Picture Tube Rental Units Toll Free How to Obtain Warranty ServiceContinental United States contact 04/04 U