Power Source, To USE AC Power | Toshiba MV13P3 guide

Do not insert fingers or any other objects into the cassette loading slot. Do not spray cleaner or wax directly on the unit or use forced air to remove dust.

Keep the unit away from flower vases, sinks, etc. If liquids should be spilled into the unit, serious damage will result. If you spill any liquids into the unit, unplug the AC power cord immediately and consult qualified service personnel before attempt- ing to use it again.

When you leave your home for a long time, unplug the AC power cord.

Avoid places subject to strong vibration. Use in a horizontal (flat) position only.

When you finish operating the unit, always unload the cassette and turn off the power.

To protect the unit from a lightning storm, unplug the AC power cord from the wall outlet and disconnect the antenna.

POWER SOURCE

TO USE AC POWER

Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet.

NOTES:

Wider Hole and Blade

AC Outlet

•Never connect the AC line cord plug to anything other than the specified voltage (120V 60Hz). Use the attached power cord only.

•If the polarized AC cord does not fit into a nonpolarized AC outlet, do not attempt to file or cut the blade. It is the user's responsibility to have an electrician replace the obsolete outlet.

•If you cause a static discharge when touching the unit, and the unit fails to function, simply unplug the unit from the AC outlet, wait a few minutes, and plug it back in. The unit should return to normal operation.

•If the AC cord plug is plugged in for the first time, wait for about 5 seconds before pressing the POWER button.

Polarized AC Cord Plug

(One blade is wider than the other) 7

5L80301C P01-09

7

20/4/04, 16:25

Image 9

Toshiba MV13P3 owner manual Power Source, To USE AC Power, Wider Hole and Blade AC Outlet

Contents

MV13P3 TV/CABLE Mode Selection Risk of Electric Shock Do not Open Accessories CleaningPower Source Grounding or Polarization Read Instructions Power Lines POWER-CORD ProtectionReplacement Parts Lightning Safety Check HeatNEC Section Features Table of Contents When YOU Experience the Above Conditions Safety PrecautionsMoisture Condensation Moisture will Condense on the Unit in the Following Cases Power Source To USE AC PowerWider Hole and Blade AC Outlet Front Rear Location of ControlsDescription of Controls Front Remote Control Cursor Selects an item in the menuSpeed button Sets the tape speed for recording Battery Precautions Battery InstallationEffective Distance of the Remote Control Feet Jack Antenna ConnectionsOhm matching transformer Antenna Jack Combiner UHF 300 ohm VHF 300 ohm For Subscribers to Basic Cable TV Service For Subscribers to Scrambled Cable TV ServiceCable TV Connections Enter Starting Setup Setting the Language Auto Clock Setting Auto Clock SettingAuto Clock Adjustment To SET Auto Clock to OFF Press MENU. Press Bor a to select option Auto for automatic setting read EDS in the signalPress or to select Daylight Saving TIME, then press a Menu screen is cleared Press Bor Ato set Manual Clock SettingMonth, then press As in , then press Adjust the volume level by Press PowerTV Operation Cable TV Channels Mute CallChannel + Mute Sleep Closed Caption Channel ReturnSleep Closed Caption What is Closed CAPTIONING? Closed Captioning with a VCRTo View Closed Captions Cable TV chart To Memorize ChannelsTV/CABLE Selection Automatic Memory Tuning Then press aNumbers will remain red until auto memorizing is complete Channel selection To ADD/DELETE Channels To Register Password Setting the V-CHIPEnter the same password Using Direct channel To SET the V-CHIP To use the TV after the TV is protected Enter To Change Password Press B or Ato select ON/OFF TIMER, then To SET the on TimerOn TIMER, then press a Option Press a To SET the OFF Timer Press Bor Ato selectOption Press a Picture Control Adjustments CancelSelection Pressing Mode Picture Quality Adjusting the Picture PreferencePress B or a to select option PREFERENCE, then press a Press or to select the desired picture Loading and Unloading a Video Cassette Automatic Power on and PlayLoading Unloading To Prevent Accidental Erasure To Record Again Tape Speed and Maximum PLAYBACK/RECORDING TimeSP Standard Play To Start Playback PlaybackStop To Stop Playback REW Digital Tracking ControlsTo Rewind or Forward the Tape Rapidly FORWARD/REVERSE Picture Search Stop Special PlaybackSkip Search PAUSE/STILL Over until the repeat mode is canceled To Watch a Tape RepeatedlyPress Bor Ato select on Recording and Viewing the Same TV Program Recording a TV Program To Stop Recording To Stop Recording Temporarily Screen and the REC indicator will lightPress Direct channel selection 0-9orCH + Ple Channel Press Direct channel ONE-TOUCH Timer Recording OTR Press or to select Timer REC SET Timer RecordingPosition, then press Enter Press the or to select the program Speed as in step Timer REC indicator will lightPress Enter Steps 3 to 6 to set the second program Cancel Other Functions for the Timer RecordingTo Cancel a Program If the Program Program Using the Real Time Tape Counter To View the Counter DisplayDisplay the elapsed time Before playback or recording, press Using Zero Return000000 Press Zero Return TV Monitor To Monitor a TV ProgramIndex search Duplicating a Video Tape Connection to Another VCRConnection to Camcorder Reception Disturbances Check the following chart before requesting service Problem and Troubleshooting GuideSymptom Cause Possible Solution Power No power Remote Control Symptom Cause Possible SolutionDepressed To turn on the closed caption Recording Video Head Cleaning Video Head CleaningVideo Head Clogging Television Limited One 1 Year Warranty Limited Ninety 90 Day WarrantyLimited Two 2 Year Warranty of Picture Tube Rental Units Toll Free How to Obtain Warranty ServiceContinental United States contact 04/04 U