Using Zero Return, 000000, Press Zero Return | Toshiba MV13P3

USING ZERO RETURN

The zero return function provides a convenient method of rapidly returning to the starting point of recording or playback. The starting point can be indexed for any location on the tape by pressing COUNTER RESET and ZERO RETURN.

1 Press CALL.

CALL

2	Before playback or recording, press
	Before playback or recording, press
	COUNTER RESET to set the counter to
	“00:00:00”.
	COUNTER
	RESET

8:40AM THU

CH 012

8:40AM THU

CH 012

:30:50 SP

00:00:00 SP

3

1

	VOL
MENU	–
MENU
DIGITAL

	7
PROGRAM	CALL
PROGRAM	0
RECTIMER	SPEED
	REC
CH+

		CLOSED
		CAPTION	INPUT
	1		INPUT
			SELECT
4		2
		2
	5		3
8			3		SKIP
8		6			SKIP
		6	TV		SEARCH
	9		TV	MONITOR
	9			MONITOR
	CHANNEL	RESETCOUNTER
RETURN		RESETCOUNTER
ZERO		SLEEP
RETURN	CANCEL	SLEEP
MUTE	CANCEL
MUTE

POWER

2

EJECT

TRACKING			CH	–
–
INDEX	–	TRACKING
+		TRACKING
REW		+
REW		PLAY		PAUSE
		PLAY

			/STILL
STOP		FF
		FF

VOL+	5
ENTER

4

3 Begin playback or recording.

REC

PLAY

OR

4 Press STOP.

STOP

5	Press ZERO RETURN.
	Press ZERO RETURN.
	The tape will rewind and
	automatically stop at the
	“00:00:00” position.
	ZERO
	RETURN

9:00AM THU

CH 012

9:00AM THU

CH 012

00:20:00 SP

00:00:00 SP

46

5L80301C P44-BACK

46

20/4/04, 16:29

Image 48

Toshiba MV13P3 owner manual Using Zero Return, Before playback or recording, press, 000000, Press Zero Return

Contents

TV/CABLE Mode Selection MV13P3 Risk of Electric Shock Do not Open Cleaning AccessoriesPower Source Grounding or Polarization Read Instructions POWER-CORD Protection Power LinesReplacement Parts Lightning Safety Check HeatNEC Section Features Table of Contents Safety Precautions When YOU Experience the Above ConditionsMoisture Condensation Moisture will Condense on the Unit in the Following Cases Power Source To USE AC PowerWider Hole and Blade AC Outlet Location of Controls Front RearDescription of Controls Front Remote Control Cursor Selects an item in the menuSpeed button Sets the tape speed for recording Battery Installation Battery PrecautionsEffective Distance of the Remote Control Feet Antenna Connections JackOhm matching transformer Antenna Jack Combiner UHF 300 ohm VHF 300 ohm For Subscribers to Basic Cable TV Service For Subscribers to Scrambled Cable TV ServiceCable TV Connections Starting Setup Enter Setting the Language Auto Clock Setting Auto Clock SettingAuto Clock Adjustment To SET Auto Clock to OFF Auto for automatic setting read EDS in the signal Press MENU. Press Bor a to select optionPress or to select Daylight Saving TIME, then press a Menu screen is cleared Manual Clock Setting Press Bor Ato setMonth, then press As in , then press Press Power Adjust the volume level byTV Operation Cable TV Channels Call MuteChannel + Mute Closed Caption Channel Return SleepSleep Closed Caption What is Closed CAPTIONING? Closed Captioning with a VCRTo View Closed Captions Cable TV chart To Memorize ChannelsTV/CABLE Selection Automatic Memory Tuning Then press aNumbers will remain red until auto memorizing is complete To ADD/DELETE Channels Channel selection Setting the V-CHIP To Register PasswordEnter the same password Using Direct channel To SET the V-CHIP Enter To use the TV after the TV is protected To Change Password To SET the on Timer Press B or Ato select ON/OFF TIMER, thenOn TIMER, then press a Option Press a To SET the OFF Timer Press Bor Ato selectOption Press a Picture Control Adjustments CancelSelection Pressing Adjusting the Picture Preference Mode Picture QualityPress B or a to select option PREFERENCE, then press a Press or to select the desired picture Automatic Power on and Play Loading and Unloading a Video CassetteLoading Unloading To Prevent Accidental Erasure To Record Again Tape Speed and Maximum PLAYBACK/RECORDING TimeSP Standard Play Playback To Start PlaybackStop To Stop Playback Digital Tracking Controls REWTo Rewind or Forward the Tape Rapidly FORWARD/REVERSE Picture Search Special Playback StopSkip Search PAUSE/STILL Over until the repeat mode is canceled To Watch a Tape RepeatedlyPress Bor Ato select on Recording a TV Program Recording and Viewing the Same TV Program Screen and the REC indicator will light To Stop Recording To Stop Recording TemporarilyPress Direct channel selection 0-9orCH + Ple Channel ONE-TOUCH Timer Recording OTR Press Direct channel Timer Recording Press or to select Timer REC SETPosition, then press Enter Press the or to select the program Timer REC indicator will light Speed as in stepPress Enter Steps 3 to 6 to set the second program Other Functions for the Timer Recording CancelTo Cancel a Program If the Program Program Using the Real Time Tape Counter To View the Counter DisplayDisplay the elapsed time Using Zero Return Before playback or recording, press000000 Press Zero Return TV Monitor To Monitor a TV ProgramIndex search Duplicating a Video Tape Connection to Another VCRConnection to Camcorder Reception Disturbances Problem and Troubleshooting Guide Check the following chart before requesting serviceSymptom Cause Possible Solution Power No power Symptom Cause Possible Solution Remote ControlDepressed To turn on the closed caption Recording Video Head Cleaning Video Head CleaningVideo Head Clogging Television Limited Ninety 90 Day Warranty Limited One 1 Year WarrantyLimited Two 2 Year Warranty of Picture Tube Rental Units How to Obtain Warranty Service Toll FreeContinental United States contact 04/04 U