ONE-TOUCH Timer Recording OTR | Toshiba MV13P3 specs

ONE-TOUCH TIMER RECORDING (OTR)

The One-touch Timer Recording feature provides a simple and convenient way to make a timed recording.

EXAMPLE: One-touch Timer Recording for 30 minutes.

1	Press POWER to turn on the	2	Load a video cassette
1	TV/VCR.	2	with the erase prevention
			tab intact.

3	Press SPEED to select the
	desired tape speed (SP or

SLP). “SP” or “SLP” will appear on the screen.

SPEED

POWER

00:00:00 SP

5

6

	VOL
MENU	–
MENU

	7
PROGRAM	CALL
PROGRAM	0
RECTIMER	SPEED
	REC
CH+

		CLOSED
		CAPTION	INPUT
	1		INPUT
			SELECT
4		2
		2
	5		3
8			3		SKIP
8		6			SKIP
		6	TV		SEARCH
	9		TV	MONITOR
	9			MONITOR
	CHANNEL	RESETCOUNTER
RETURN		RESETCOUNTER
ZERO		SLEEP
RETURN	CANCEL	SLEEP
MUTE	CANCEL
MUTE

POWER

1

STOP

	DIGITAL			CH
	TRACKING			CH	–
	–
	INDEX	–	TRACKING
EJECT	+		TRACKING
EJECT	REW		+
	REW		PLAY		PAUSE
			PLAY

				/STILL
	STOP		FF
			FF

VOL+

ENTER

5

3

4		Set the TV/CABLE selec-
		tion to the appropriate
		position (see page 22).

	TV	- VHF/UHF channels
	CABLE - Cable TV channels

Press Direct channel

5 selection (0–9)orCH + or – to select the channel to be

recorded (Example: Channel 12).

0

1

2

OR

CH 012

CH +

CH –

	6	Press both REC at the same
		time to begin recording.
		Press the buttons again to
		Press the buttons again to

stop recording after 30 minutes. Each additional press of both REC will increase recording time as shown below, up to a maximum of 6 hours. “OTR” will appear on the screen.

REC	OTR 0 : 30
	OTR 0 : 30
	CH 012
	INDEX

NOTES: • Press both REC at the same time to increase the time needed for recording (see the chart below).

Press	once	twice	3 times	4 times	5 times	6 times	7 times	8 times	9 times	10 times
Recording time	NORMAL REC	0:30	1:00	1:30	2:00	3:00	4:00	5:00	6:00	NORMAL REC

• To cancel OTR, press STOP.	41
• The TV/VCR channel cannot be changed during recording.

5L80301C P34-43

41

20/4/04, 16:29

Image 43

Toshiba MV13P3 owner manual ONE-TOUCH Timer Recording OTR, Press Direct channel

Contents

MV13P3 TV/CABLE Mode Selection Risk of Electric Shock Do not Open Read Instructions CleaningAccessories Power Source Grounding or Polarization Lightning POWER-CORD ProtectionPower Lines Replacement Parts Heat Safety CheckNEC Section Features Table of Contents Moisture will Condense on the Unit in the Following Cases Safety PrecautionsWhen YOU Experience the Above Conditions Moisture Condensation To USE AC Power Power SourceWider Hole and Blade AC Outlet Front Location of ControlsFront Rear Description of Controls Cursor Selects an item in the menu Remote ControlSpeed button Sets the tape speed for recording Feet Battery InstallationBattery Precautions Effective Distance of the Remote Control Antenna Jack Combiner UHF 300 ohm VHF 300 ohm Antenna ConnectionsJack Ohm matching transformer For Subscribers to Scrambled Cable TV Service For Subscribers to Basic Cable TV ServiceCable TV Connections Enter Starting Setup Setting the Language To SET Auto Clock to OFF Auto Clock SettingAuto Clock Setting Auto Clock Adjustment Menu screen is cleared Auto for automatic setting read EDS in the signalPress MENU. Press Bor a to select option Press or to select Daylight Saving TIME, then press a As in , then press Manual Clock SettingPress Bor Ato set Month, then press Cable TV Channels Press PowerAdjust the volume level by TV Operation Mute CallMute Channel + Closed Caption Closed Caption Channel ReturnSleep Sleep Closed Captioning with a VCR What is Closed CAPTIONING?To View Closed Captions To Memorize Channels Cable TV chartTV/CABLE Selection Then press a Automatic Memory TuningNumbers will remain red until auto memorizing is complete Channel selection To ADD/DELETE Channels Using Direct channel Setting the V-CHIPTo Register Password Enter the same password To SET the V-CHIP To use the TV after the TV is protected Enter To Change Password Option Press a To SET the on TimerPress B or Ato select ON/OFF TIMER, then On TIMER, then press a Press Bor Ato select To SET the OFF TimerOption Press a Cancel Picture Control AdjustmentsSelection Pressing Press or to select the desired picture Adjusting the Picture PreferenceMode Picture Quality Press B or a to select option PREFERENCE, then press a Unloading Automatic Power on and PlayLoading and Unloading a Video Cassette Loading Tape Speed and Maximum PLAYBACK/RECORDING Time To Prevent Accidental Erasure To Record AgainSP Standard Play To Stop Playback PlaybackTo Start Playback Stop FORWARD/REVERSE Picture Search Digital Tracking ControlsREW To Rewind or Forward the Tape Rapidly PAUSE/STILL Special PlaybackStop Skip Search To Watch a Tape Repeatedly Over until the repeat mode is canceledPress Bor Ato select on Recording and Viewing the Same TV Program Recording a TV Program Ple Channel Screen and the REC indicator will lightTo Stop Recording To Stop Recording Temporarily Press Direct channel selection 0-9orCH + Press Direct channel ONE-TOUCH Timer Recording OTR Press the or to select the program Timer RecordingPress or to select Timer REC SET Position, then press Enter Steps 3 to 6 to set the second program Timer REC indicator will lightSpeed as in step Press Enter Program Other Functions for the Timer RecordingCancel To Cancel a Program If the Program To View the Counter Display Using the Real Time Tape CounterDisplay the elapsed time Press Zero Return Using Zero ReturnBefore playback or recording, press 000000 To Monitor a TV Program TV MonitorIndex search Connection to Another VCR Duplicating a Video TapeConnection to Camcorder Reception Disturbances No power Problem and Troubleshooting GuideCheck the following chart before requesting service Symptom Cause Possible Solution Power Recording Symptom Cause Possible SolutionRemote Control Depressed To turn on the closed caption Television Video Head CleaningVideo Head Cleaning Video Head Clogging Rental Units Limited Ninety 90 Day WarrantyLimited One 1 Year Warranty Limited Two 2 Year Warranty of Picture Tube 04/04 U How to Obtain Warranty ServiceToll Free Continental United States contact