Toshiba P10 Flash Picture Mode Only, Self-timer Picture Mode Only, Operation, Display Screen

Flash (Picture Mode Only)

This camcorder has three flash settings. To change flash setting by either hot key (Right Button) or Option Setting.

•Auto ( ): The flash fires automatically according to light conditions. Use this mode for general photography.

•Red Eye ( ): The pre-flash will fire to reduce the red-eye effect.

•Off ( ): The flash will not fire under any circumstances. Use this mode when taking images in a place where flash photography is prohibited, or when the subject is distant (beyond the range of the flash).

Operation Display Screen

1.In Picture Mode submenu, press UP/Down button to select Flash.

2.Use Right/Left Buttons to move between 3 settings.

3.Press OK Button to validate the setting.

Note

The flash will be disabled automatically when battery power is low ( ).

Self-timer (Picture Mode Only)

The self-timer allows you to take pictures with a ten-second time delay. The self-timer LED on the front of the camcorder beneath the flash light will also blink. The speed of blinking will increase just before the picture is taken.

Operation Display Screen

1.In Picture Mode submenu, press UP/Down button to select Self-timer.

2.Use Right/Left Buttons to choose On or Off.

3.Press OK Button to validate the setting.

16

EN